B.10 LWS Messages
Messages beginning with LWS are issued by the integrated HTTP server.
LWS0001I Server has been initialized.
Explanation:
The server has successfully completed its initialization phase.
Action:
None. Informational only.
LWS0002I All services are now active.
Explanation:
All of the services offered by the server are now active and ready for work.
Action:
None. Informational only.
LWS0003I Server shut down successfully.
Explanation:
The server processing completed normally. The server ends with a return code of 0.
Action:
No action is required.
LWS0004W Server shut down with warnings.
Explanation:
The server processing completed normally with at least one warning. The server ends with a return code of 4.
Action:
See the log for additional messages that describe the warning conditions.
LWS0005E Server shut down with errors.
Explanation:
The server processing ended with one or more errors. The server ends with a return code of 8.
Action:
See the log for additional messages that describe the error conditions.
LWS0006I Starting service.
Explanation:
The server is starting the specified service.
Action:
None. Informational only.
LWS0007E Failed to start service.
Explanation:
The server attempted to start the specified service, but the service could not start. The server terminates processing.
Action:
See the log for additional messages that describe the error condition.
LWS0008I Stopping all services.
Explanation:
The server was requested to stop. All services are notified and will subsequently end processing.
Action:
None. Informational only.
LWS0009I Local host is host_name (IP_address).
Explanation:
This message shows the host name and IP address of the machine that the server is running on.
Action:
None. Informational only.
LWS0010I Local host is IP_address.
Explanation:
This message shows the IP address of the machine that the server is running on.
Action:
None. Informational only.
LWS0011I Server is now processing client requests.
Explanation:
The server has successfully started all configured services, and it is ready for clients to begin requests.
Action:
None. Informational only.
LWS0012I service is now active on port number.
Explanation:
The server service is running on the specified TCP port number. Clients can begin making requests to the specified service.
Action:
None. Informational only.
LWS0013I service is now inactive on port number.
Explanation:
The server service is not active on the specified TCP port number. Processing continues, but no client requests can be made to the service until it becomes active again.
Action:
None. Informational only.
LWS0014E An error was encountered while parsing execution parameters.
Explanation:
An error occurred while parsing the execution parameters. The server terminates with a minimum return code of 8.
Action:
Collect diagnostic information and contact Novell Technical Support.
LWS0015E service failed to start with error number.
Explanation:
The specified service failed to start. The server terminates with a minimum return code of 8.
Action:
Collect diagnostic information and contact Novell Technical Support.
LWS0020I Server version level: level.
Explanation:
This message contains information detailing the current service level for the server program being executed. The value of version indicates the current release of the server. The value of level is a unique sequence of characters that can be used by Novell Technical Support to determine the maintenance level of the server being executed.
Action:
Normally, no action is required. However, if you report a problem with the server to Novell Technical Support, you might be asked to provide the information in the message.
LWS0023I Listen port number is already in use.
Explanation:
The displayed listen port is already in use by another task running on the local host. The server retries establishing the listen port.
Action:
Determine what task is using the required port number and restart the server when the task is finished, or specify a different port in the configuration file. If the port number is changed for the server, the client must also specify the new port number.
LWS0024W Too many retries to obtain port number.
Explanation:
The server tried multiple attempts to establish a listen socket on the specified port number, but the port was in use. The server terminates with a return code of 4.
Action:
Determine what task is using the required port number, and restart the server when the task is finished, or specify a different port in the configuration file. If the port number is changed for the server, the client must also specify the new port number.
LWS0025I Local TCP/IP stack is down.
Explanation:
The server detected that the local host TCP/IP service is not active or is unavailable. The server retries every two minutes to reestablish communication with the TCP/IP service.
Action:
Ensure that the TCP/IP service is running.
LWS0026E Unrecoverable TCP/IP error number returned from internal_function_name.
Explanation:
An unrecoverable TCP/IP error was detected in the specified internal server function name. The server ends with a minimum return code of 8. The error number reported corresponds to a TCP/IP errno value.
Action:
Correct the error based on TCP/IP documentation for the specified errno.
LWS0027W Listen socket was dropped for port number.
Explanation:
The server connection to the displayed listen port was dropped. The server attempts to reconnect to the listen port so that it can receive new client connections.
Action:
Determine why connections are being lost on the local host. Ensure that the host TCP/IP services are running.
LWS0028E Unable to reestablish listen socket on port number.
Explanation:
The listen socket on the specified port number was dropped. The server tried multiple attempts to reestablish the listen socket, but all attempts failed. The server ends with a return code of 8.
Action:
Determine if the host’s TCP/IP service is running. If the host’s TCP/IP service is running, determine if another task on the local host is using the specified port.
LWS0029I <id> Client request started from ip_address on port number.
Explanation:
A new client request identified by id has been started from the specified IP address on the displayed port number.
Action:
None. Informational only.
LWS0030I <id> Client request started from host (ip_address) on port number.
Explanation:
A new client request identified by id has been started from the specified host and IP address on the displayed port number.
Action:
None. Informational only.
LWS0031W Unable to stop task id: reason.
Explanation:
The server attempted to terminate a service task identified by id. The server could not stop the task for the specified reason. The server ends with a return code of 4.
Action:
See the reason text for more information about why the task could not terminate.
LWS0032I <id> Client request has ended.
Explanation:
The client requested identified by id has ended.
Action:
None. Informational only.
LWS0033I <id> Client request: resource.
Explanation:
The client connection identified by id issued a request for resource.
Action:
None. Informational only.
LWS0034W <id> Write operation for client data has failed.
Explanation:
A write operation failed for the connection identified by id. This is normally because the client dropped the connection. The client connection is dropped by the server.
Action:
Ensure that the client does not prematurely drop the connection. Retry the client request if necessary.
LWS0035W <id> Read operation for client data has timed out.
Explanation:
A read operation on the connection identified by id has timed out because of inactivity. The client connection is dropped by the server.
Action:
Ensure that the client does not prematurely drop the connection. Retry the client request if necessary.
LWS0036W <id> Client request error: error_code - error_text.
Explanation:
The server encountered an error while processing the client request. The server terminates the request.
Action:
Determine why the request was in error by viewing the error code and error text that was generated.
LWS0037W <id> Client request error: code.
Explanation:
The server encountered an error while processing the client request. The server terminates the request.
Action:
Determine why the request was in error by viewing the error code and error text that was generated.
LWS0038I Received command: command_text.
Explanation:
The server has received the displayed command from the operator. The server processes the command.
Action:
None. Informational only.
LWS0043E Task id ended abnormally with RC=retcode.
Explanation:
The server detected a task that ended with a non-zero return code. The server ends with a minimum return code of 8.
Action:
View the log for other messages that might have been generated regarding the error.
LWS0045I Idle session time-out is number seconds.
Explanation:
The message shows the idle time limit for connections. The server automatically terminates sessions that are idle for longer than the specified number of seconds.
Action:
None. Informational only.
LWS0046I Maximum concurrent sessions limited to number.
Explanation:
The message shows the maximum number of concurrent sessions allowed. The server allows only the specified number of concurrent sessions to be active at any given time. All connections that exceed this limit are forced to wait until the total number of connections drops below the specified value.
Action:
None. Informational only.
LWS0047W Unable to delete log file filename.
Explanation:
The log file could not be deleted as specified.
Possible cause:
The user service or daemon does not have file system rights to delete old log files.
Action:
Verify that the user service or daemon has the appropriate rights.
Action:
Examine the current logs for related messages.
LWS0048I Log file filename successfully deleted.
Explanation:
The log file has been deleted as specified.
Action:
None. Informational only.
LWS0049E Error error authenticating to the directory as fdn.
Explanation:
The connection manager could not connect to the directory as user fdn. The error was error.
Possible cause:
The configuration parameters do not contain the correct user or password.
Action:
Correct the cause of the error as determined from error.
Action:
Verify that the User object has the appropriate rights.
Action:
Verify that the password given for the User object in the configuration parameters is correct.
LWS0050E Server application initialization failure was detected.
Explanation:
During server initialization, an error was detected while initializing the server Application object.
Possible Cause
This message is commonly logged when the driver is started and then immediately shut down. This can happen during installation, when the shim is started to generate keys or configure SSL. You can safely ignore this message in those cases.
Action:
See the error logs for additional messages that indicate the cause of the error.
LWS0051E Server initialization failure was detected.
Explanation:
The server failed to initialize properly because of an initialization error specific to the operating system.
Action:
See the log for additional messages that indicate the cause of the error.
LWS0052W This server is terminating because of another instance already running (details).
Explanation:
The server is shutting down because there is another active instance of this server running on the host.
Possible cause:
A previous instance of the server was not stopped before starting a new instance.
Action:
Stop or cancel the previous server instance before starting a new one.
LWS0053I The parameter keyword is no longer supported.
Explanation:
The specified parameter is not supported in this release and might be removed in future releases.
Possible cause:
An execution parameter was specified that is no longer supported.
Action:
Do not specify the unsupported parameter.
LWS0054I The execution parameter keyword is in effect.
Explanation:
The specified execution parameter is in effect for the server.
Action:
Informational only. Processing continues.
LWS0055W Invalid execution parameter detected: keyword.
Explanation:
An invalid execution parameter was detected.
Action:
Do not specify the invalid or unknown execution parameter.
LWS0056I Not accepting new connections because of the MAXCONN limit. There are number active connections now for service.
Explanation:
The specified service has a maximum connection limit that has been reached. The service no longer accepts new connections until at least one of the active connections ends.
Action:
If you receive this message frequently, increase the MAXCONN limit for this service or set the MAXCONN to unlimited connections.
LWS0057I New connections are now being accepted for service.
Explanation:
The service was previously not accepting new connections because of the imposed MAXCONN limit. The service can now accept a new connection because at least one active connection has ended.
Action:
None. Informational only.
LWS0058I Listen socket on port number has been re-established.
Explanation:
The previously dropped listen socket has been reestablished. Services using the specified port can now continue. The listen socket previously dropped because of an error or TCP/IP connectivity problems has been reestablished. Client connection processing continues.
Action:
None. Informational only.
LWS0059W Server is terminating because the required service serviceName is ending.
Explanation:
The specified required service has ended. The server terminates because it cannot continue running without the required service.
Action:
See related log messages to determine why the required service ended. Correct the problem and restart the server.