Installing iFolder

  1. Review the information in Things You Should Know During the Installation before beginning the installation.

    2.

  2. On the workstation that you plan to install iFolder from, map a Novell drive to the root of the SYS: volume of the NetWare server where you want to install iFolder and Apache.

    IMPORTANT:  Apache must be installed on the SYS: volume.

    3.

  3. Locate the iFolder software that you downloaded and double-click the iFolder Apache server executable (ApacheiFolderServer.EXE) for NetWare.

  4. Follow the on-screen instructions.

    5.

  5. After the installation is complete, do one of the following:

    • If you are using only one IP address, start Novell iFolder by rebooting your server (this will run the edited AUTOEXEC.NCF) or entering the following commands at the server console:

      search add sys:\Apache

      search add sys:\Apache\iFolder\Server

      STARTIFOLDER

      •

    • If you are using two IP addresses, edit the AUTOEXEC.NCF file by entering the following lines after the search add sys:\Apache\iFolder\Server command line:

      set command line prompt default choice=on

      set command line prompt time out=60

      Also enter ? in front of the STARTIFOLDER command line.

      After you have edited the AUTOEXEC.NCF, start Novell iFolder by rebooting your server (this will run the edited AUTOEXEC.NCF) or entering the following commands at the server console:

      search add sys:\Apache

      search add sys:\Apache\iFolder\Server

      STARTIFOLDER

    6.