7.4 Re-Installing SSL VPN on Linux Access Gateway

If you had installed SSL VPN along with Linux Access Gateway and had to delete SSL VPN, follow the steps given below to re-install SSL VPN:

  1. Copy the Novell Access Manager tar.gz files on to the Linux Access Gateway machine.

    For the actual filename, see the Novell Access Manager Readme.

  2. After downloading the upgrade, unpack the tar.gz file using the following command:

    tar -xzvf <filename>

  3. At the command prompt, enter the following install script command:

    ./install.sh

    You are prompted to select an installation.

  4. When prompted to install a product, type 3 to install the Novell SSL VPN Agent, then press the Enter key to begin.

  5. Review and accept the License Agreement.

  6. Specify the IP address of the Administration Console when prompted.

  7. Specify the name of the administrator for the Administration Console.

  8. Specify the administration password.

  9. Confirm the password.

  10. (Conditional) If the SSL VPN machine has been configured with multiple IP address, you are prompted to select an IP address for the SSL VPN server.

  11. Wait while the SSL VPN server is installed on your system and imported into the Administration Console, which takes about 2 minutes.

    The installation ends with the following message: Installation complete.

  12. To verify the installation of the Access Gateway, continue with Section 7.3.5, Verifying that Your SSL VPN Service Is Installed.