If you didn't load the RconsoleJ Agent when you started the server, you can use this procedure to do it.
At the System Console prompt, enter
RCONAG6
Enter the password you want network administrators to use when accessing the target NetWare® server using RConsoleJ.
Enter the TCP port number.
The default value is 2034.
If the server communicates using IPX™ only, enter -1 to disable TCP listening.
To enable listening over a dynamically assigned port, enter 0.
Enter the SPX™ port number on which RCONAG6 will listen for a proxy server.
The default is 16800.
If the server communicates using IP only, enter -1 to disable SPX listening.
To enable listening over a dynamically assigned port, enter 0.
NOTE:/DEV/TCP and /DEV/TCPSSL will fail if you are using a pure IPX server.
To enable RconsoleJ across the firewall, keep the following ports open: 2034, 2035, and 2036.
Enter the TCP port number for the secure session.
The default is 2036.
Ensure that the Key Material Object named SSL CertificateDNS has been created.
NOTE:The Secure connection is available only on IP and not on IPX.