Use the commands in this section for tuning the purging processes for NSS volumes. For more information about managing salvage for NSS volumes, see Section 23.0, Salvaging and Purging Deleted Volumes, Directories, and Files.
Enables or disables files to be purged immediately upon deletion.
NSS volumes on the server can optionally use the salvage feature of NSS to save deleted files until space is needed. When you enable the Immediate Purge of Deleted Files parameter, it affects all volumes on the server. If the Salvage attribute is enabled for a volume, enabling this flag overrides it so that deleted files and directories are purged immediately.
Default: Disabled
Enables or disables the ability to salvage of deleted files on volumes. Volume enables the Salvage command on the specified NSS volume on the specified server. All enables the Salvage command on all NSS volumes on the specified server.
The number of seconds before deleted logical volumes are purged. This allows time to reverse the deletion.
Default: 345600 (4 days)
The number of seconds after NSS loads before deleted logical volumes are purged. This allows time to pause autopurging.
Default: 7200
The number of seconds to delay purging a deleted logical volume after clicking Continue. After a volume starts to purge, it cannot be salvaged.
Default: 900
Purging begins in the salvage area when the pool’s low watermark is reached, and continues until its high watermark is reached, or until there are no deleted files and volumes left to purge, whichever occurs first. Autopurging does not start again until free space again drops below the low watermark. Specify a given poolname or All to apply the setting to all pools.
The high and low watermarks must be at least 2% apart from each other.
Default: 20
Range: 2 to 100
Purging begins in the salvage area when the pool’s low watermark is reached and continues until its high watermark is reached. When free disk space falls below a low watermark, NSS begins autopurging the salvage area. Specify a given poolname or All to apply the setting to all pools.
The high and low watermarks must be at least 2% apart from each other.
Default: 10
Range: 0 to 98
Lets you restore the sys: volume if you have deleted it (if it has not yet been purged).
Displays information about deleted logical volumes.
Displays information about salvageable logical volumes.