SNMP Traps

The SNMP Traps panel lets you configure the SNMP traps on the Primary Server to send log messages. The SNMP messages are sent in a predefined format and consists of the following two parts.

SNMP Message Header The following table lists the fields contained in the header:

Field	Details
Version number	Specifies the version of SNMP used. ZENworks Configuration Management 10 uses SNMPv1.
Community String	Defines an access environment for a group of network-management systems (NMS).

Protocol Data Unit (PDU) The following table lists the fields contained in the PDU:

Field	Details
Enterprise	Identifies the type of managed object generating the trap. ZENworks Configuration Management 10 uses 1.3.6.1.4.1.23.2.80.100.
Agent address	Provides the IP address of the machine where the trap was generated.
Generic trap type	This has the integer value 6. Type 6 is an enterprise- specific trap type, which has no standard interpretation in SNMP. The interpretation of the trap depends upon the value in the specific trap type field, which is defined by Message Logger MIB.
Specific trap code	For enterprise-specific traps generated by ZENworks Configuration Management 10, the values in the specific trap type field are as indicated below: For a severity level of MessageLogger.ERROR, the specific trap is 1. For a severity level of MessageLogger.WARN, the specific trap is 2. For a severity level of MessageLogger.INFO, the specific trap is 3.
Time stamp	The time stamp indicating when the trap occurred.
Variable bindings	Provides additional information pertaining to the trap. This field consists of the following name/value pairs: For trap ID 1.3.6.1.4.1.23.2.80.100.0.1, the value is the device GUID. For trap ID 1.3.6.1.4.1.23.2.80.100.0.2, the value is the device name. For trap ID 1.3.6.1.4.1.23.2.80.100.0.3, the value is the component name. For trap ID 1.3.6.1.4.1.23.2.80.100.0.4, the value is the time when the message was logged. For trap ID 1.3.6.1.4.1.23.2.80.100.0.5 the value is the message ID. For trap ID 1.3.6.1.4.1.23.2.80.100.0.6 the value is the probable cause.

You can configure the following options:

Send as SNMP Trap if Severity Is

Allows you to select the severity of the logged message to send the SNMP trap.

The severity of the messages include:

Error: Stores messages with a severity of Error.
Warning and Above: Stores messages with a severity of Warning and Error.
Information and Above: Stores messages with a severity of Information, Warning, and Error.

Trap Target

Specify the IP address or DNS name of the SNMP server.

Port

Specify the port number of the SNMP server configured for this operation. By default, the port number is 162.

Community String

Specify the community string of the SNMP trap that is to be sent.