1.0 Registry Keys

AllowAnonymousAccessToContentRepo

Windows: HKLM\Software\Novell\ZCM

Linux: /etc/opt/novell/zenworks/conf/xplatzmd.properties

Allows the user to access the content-repo directory anonymously.

String

True

AllowPassiveModeLoginOnServers

HKLM\Software\Novell\ZCM\ZenLgn

To log in to the ZENworks console and to dynamically create user accounts for Windows 2003, Windows 2008, and Windows 2008 R2 devices. You can also use the DLU policy to create users dynamically.

DWORD

1

CDPWebCallWaitTimeout

HKLM\Software\Novell\ZCM

To modify the Web Service time out on a Satellite device for Windows, set this registry key value to the desired time you want.

For more information, see Manually Configuring the Web Service Timeout Advanced Content Replication Setting in the ZENworks 11 Primary Server and Satellite Reference.

String

Desired time in milliseconds

DefaultRealm

HKLM\Software\Novell\ZCM\ZenLgn\

To reduce the device login time, specify the user source in this registry key.

For more information, see Reducing Device Login Time by Specifying the Default User Source in the ZENworks 11 User Source and Authentication Reference.

String

Desired User source

The DefaultRealm value is case sensitive since the realm name is case sensitive.

Disabled

HKLM\Software\Netware\Nal1.0\NalView

During the user login, NalView.exe runs on the device, resulting in delay in the overall login time. To speed up the login process, set the registry key value to 1.

For more information, see Troubleshooting User Sources in the ZENworks 11 User Source and Authentication Reference.

DWORD

1

DisablePassiveModeLogin

HKLM\Software\Novell\ZCM\ZenLgn

To disable login to the Management Zone when the user logs in through the Microsoft or Novell client.

DWORD

Any non-zero value

DisableZENCredentialProvider

HKLM\Software\Novell\ZCM\ZenLgn

The ZENworks Credential Provider filters the Windows Password Credential Provider. When you install the ZENworks Agent on the Windows Vista or later versions and Windows 2008 Server or later versions device that has third-party products with Credential Providers installed, multiple user tiles are displayed.

For more information, see “Disabling the ZENWorks Credential Provider on a Device” in the ZENworks 11 User Source and Authentication Reference.

DWORD

1

DonotFetchUserGroups

HKLM\Software\Novell\ZCM\AgentSettings

To significantly improve the time taken to log in to a managed device, if a Dynamic Local User policy that has no login restrictions configured is assigned to the device.

For more information, see Dynamic Local User Policy in the ZENworks 11 Configuration Policies Reference.

String

True

DontUpdateGroupMemberships

Windows 32-bit:

HKLM\Software\Novell\Nwgina\DynamicLocalUser

Windows 64-bit:

HKLM\Software\Wow6432Node\Novell\Nwgina\DynamicLocalUser

To update group memberships of the user on the managed device.

For more information, see Unable to update the group membership of the user on the managed device in the ZENworks 11 Configuration Policies Reference.

String

0

EnableBatchRefresh

HKLM\Software\Novell\ZCM\

To refresh the user sessions on a device in batches, set this registry key value to 1.

For more information, see The partial or the general refresh of a terminal server might cause high usage of system resources and take considerable time to refresh the server in the ZENworks 11 Adaptive Agent Reference.

String

1

EnableSeamlessLogin

HKLM\Software\Novell\ZCM\ZenLgn\

To enable seamless authentication for a user on a device, set this registry key value to 1.

For more information, see Enabling Seamless Authentication on a Device in the ZENworks 11 User Source and Authentication Reference.

DWORD

1

EnableStatusMessages

HKLM\Software\Novell\

To disable the login status messages on a device screen, set this registry key value to 0.

For more information, see Disabling the Login Status Messages Display on the Device Screen in the ZENworks 11 User Source and Authentication Reference.

DWORD

0

EnableZENMemoryKeyCache

HKLM\Software\Novell\ZCM

This registry key creates a memory cache for storing keys of all the cached entires. You can use this memory cache to look up if a particular entry is cached or not, in a Terminal server multiuser login scenario. If the entry is not cached, then the unnecessary access to the persistent cache can be avoided.

String

True / False

Full

HKLM\Software\Novell\ZCM\Migration\MSIOptions\

Displays a full user interface (Wizard dialog boxes, progress information, error messages and prompts, and so forth).

For more information, see Using the Registry Editor to Configure Additional Options for Migrating MSI Applications in the ZENworks 11 Configuration Management Migration Guide.

String

/qf

HonorWorkstationOnlyLogin

HKLM\Software\Novell\ZCM\

To log in directly into a Windows 7, Windows 8, or Windows Vista workstation that has both the Novell Client and the ZENworks Agent installed, set this registry key value to 1.

For more information, see Logging Directly in to a Workstation That has Both Novell Client and ZENworks Agent Installed in the ZENworks 11 User Source and Authentication Reference.

DWORD

1

LoadAppdataIntoMemoryOndemand

HKLM\Software\Novell\ZCM\

To delay loading of the action data into the memory to a required point and to reduce the memory footprint for devices with low memory.

All ZENworks applications contain some action data. This is required to process actions such as launch, install, uninstall and so forth.

For more information, see Enabling the Loading of Application Data in to the Device Memory on Demand in the ZENworks 11 Software Distribution Reference.

String

True

LogoffCheckSysModules

HKLM\System\CurrentControlSet\Control\Citrix\wfshell\TWI

To completely terminate a session on the Citrix server and ensure that policies are unenforced on the device.

For more information, see Closing a published application or logging out of the shared desktop of a Citrix server fails to terminate the session on the Citrix server in the ZENworks 11 Configuration Policies Reference.

String

Change the value from ZCMUMHelper.exeto ZenUserDaemon.exe, ZCMUMHelper.exe

MigrateWithParentOptions

HKLM\Software\Novell\ZCM\Migration\MSIOptions\

MSPs are migrated in Silent mode.

For more information, see Using the Registry Editor to Configure Additional Options for Migrating MSI Applications in the ZENworks 11 Configuration Management Migration Guide.

String

0

MaxLogFileSize

HKLM\Software\Novell\ZCM\ZenLgn\MaxLogFileSize

To retain the old logs and append the new logs in the zenlgn.log file, specify in Kilo Bytes.

DWORD

1024

MaxZenPrinterProcessingTimeOut

To set a default value that forces the Printer policy handler to wait for a set amount of time.

For more information, see Printer Policy Troubleshooting in the ZENworks 11 Configuration Policies Reference.

String

Specify an appropriate time out value in seconds.

PERMISSION_MSG_POSTPONES_REMAINING

HKLM\Software\Novell\ZCM\System Update

The value of this key determines the number of times the user can postpone an update.

For more information, see Configuring the System Update Behavior of the ZENworks Adaptive Agent in the ZENworks 11 System Updates Reference.

String

Specify the number of times you need to postpone the update.

Progress

HKLM\Software\Novell\ZCM\Migration\MSIOptions\

Displays simple progress information and error messages/prompts.

For more information, see Using the Registry Editor to Configure Additional Options for Migrating MSI Applications in the ZENworks 11 Configuration Management Migration Guide.

String

/qb!

ReApplyPolicyatDeviceStartup

HKLM\Software\Novell\ZCM\GroupPolicy

To apply Group policy again at device startup even if there is no change in the group policy. This is useful when group policy has security settings, which are not registry configurable. For example: Deny local login.

For more information, see Windows Group Policy Troubleshooting in the ZENworks 11 Configuration Policies Reference.

String

Any value other than null

Reduced

HKLM\Software\Novell\ZCM\Migration\MSIOptions\

Displays a full user interface with wizard dialog boxes suppressed

For more information, see Using the Registry Editor to Configure Additional Options for Migrating MSI Applications in the ZENworks 11 Configuration Management Migration Guide.

String

/qr

ScheduleRetries

HKLM\Software\Novell\ZCM\

If a bundle with an assignment schedule fails to execute on a device, an attempt to execute the bundle on the device is made five times, by default.

For more information, see Assigning Existing Bundles to Devices in the ZENworks 11 Software Distribution Reference.

String

0

SkipIPrintClientValidation

HKLM\Software\Novell\ZCM\Migration

To migrate an iPrint policy that does not have the policy setup file associated with it, set the value of this registry key to false.

For more information, see Unable to migrate iPrint policy that does not have the policy setup file associated with it in the ZENworks 11 Configuration Management Migration Guide.

String

False /True

SqliteCacheSeconds

HKLM\Software\Novell\ZCM\

To allow data to persist in the cache memory, set this registry key value to 10000. This allows the data to be present in the cache memory for 10000 milliseconds.

String

10000

UMUserFullName

HKLM\Software\Novell\ZCM\Usage

For user login name, to change the setting from User ID to Full Name mode, set this registry value to 1.

For more information, see Troubleshooting the Adaptive Agent in the ZENworks 11 Adaptive Agent Reference.

String

1 / 0

ZENCachePersistObjectsAsynchronously

HKLM\Software\Novell\ZCM

To improve the login performance on Terminal servers, enable the asynchronous persistence of objects.

String

True / False

ZENThreadPoolMax

HKLM\Software\Novell\ZCM\

This registry key defines the maximum thread count in ZENworks thread pool. The default value is 150 on a Terminal server and 50 on other devices.

String

Specify a number.

ZISWINClear

HKLM\Software\Novell\ZCM

When this string value is set to 1, ZISWIN clears all the Image Safe data and exits without performing any other task.

For more information, see Novell ZENworks ISD Service in ZENworks 11 Preboot Services and Imaging Reference.

String

1

ZISWIN Reset Flag

HKLM\Software\Novell\ZCM

When this string value is set to 1, ZISWIN sets the Just Imaged flag to FALSEexits without performing any other task.

For more information, see the ZENworks 11 Preboot Services and Imaging Reference.

String

1

ZISWIN SYSPrep Restore Mask

HKLM\Software\Novell\ZCM

If you are using the SYSPrep process to mask the Image Safe data components, then use this registry key.

For more information, see ZENworks Imaging Engine Commands in the ZENworks 11 Preboot Services and Imaging Reference.

DWORD

Desired value of the Image Safe data component.

ZISWIN Clear Mask

HKLM\Software\Novell\ZCM

You can use this DWORD to specify the components that you want ZISWIN to clear from the Image Safe data.

For more information, see Component Masks in the ZENworks 11 Preboot Services and Imaging Reference.

DWORD

Desired value of the Image Safe data component.