LIST STORAGE DEVICE BINDINGS

Purpose

Use at the server console to list all Custom Device Modules (CDMs) bound to a particular device.

Syntax

LIST STORAGE DEVICE BINDINGS number

Parameter Use to

Parameter	Use to
number	Specify the object number for the device whose CDMs you want to list. To find the object number, enter LIST DEVICES at the console prompt. The object number is the first number on the left. This number is displayed with leading zeros, for example, 0x0001. Do not include the zeros on the command line; for example: `list storage device bindings 1`

number

Specify the object number for the device whose CDMs you want to list.

To find the object number, enter LIST DEVICES at the console prompt. The object number is the first number on the left.

This number is displayed with leading zeros, for example, 0x0001. Do not include the zeros on the command line; for example:

list storage device bindings 1

Using LIST STORAGE DEVICE BINDINGS

When you execute the command, the screen displays information similar to the following:

Device: [V312-A0-D0:0] SEAGATE ST32430N rev:0510  
Filter: NetWare Elevator Filter  
Filter: NetWare Sector Conversion Filter  
Base: Novell SCSI Fixed Disk CDM  
HAM: [V312-A0] ADAPTEC PCI Host Adapter Module

The first line specifies the device.

The next lines specify the CDMs associated with the device.

Filters are CDMs that communicate with the storage device. The elevator filter controls messages to and from the storage device, including scatter-gather messages. The sector conversion filter converts sector sizes to standard 512 byte units.

The Base is the essential CDM required to manage communication with the Host Adapter Module.

Information about CDMs for changers (called Enhancers) might also be displayed.

The last line identifies the Host Adapter Module for the adapter to which the device is connected.