Remote Management Settings

The Remote Management Settings are a set of rules which determine the behavior or the execution of Remote Management service on the managed device. The settings include the properties such as Remote Management service, remote session, performance, etc. These settings applies only to the managed devices, and not to the users.

You can define the Remote Management settings at three levels:

Management Zone: The settings are inherited by all device folders and devices.
Device Folder: The settings are inherited by all devices contained within the folder or its subfolders. Overrides the Management Zone settings.
Device: The settings apply only to the device for which they are configured. Overrides the settings configured at the Management Zone and folder levels.

NOTE:If you are configuring the settings on a device folder or a device, you need to click Override settings before you can modify the settings.

Service Settings

Session Settings

Performance Settings During Remote Session

Proxy Settings

The Proxy Settings panel lets you define proxy servers you want to use. If the managed device is on a private network or is on the other side of a firewall or router that is using NAT (Network Address Translation), the remote management operation of the device can be routed through a proxy server. You must install proxy servers separately. For information on installing the proxy server, see Remote Management Reference

Task	Details
Add a Proxy Server	Click Add to display the Add Proxy Settings dialog box. Fill in the following fields: Proxy: Specify the IP address or DNS name of the proxy server. IP Address Range: Specify the IP addresses of the devices you want to remotely manage through the proxy server. You can specify the IP address range in one of the following ways: Specify the range of IP addresses using CIDR (Classless Inter-Domain Routing) notation. With CIDR, the dotted decimal portion of the IP address is interpreted as a 32-bit binary number that has been broken into four 8-bit bytes. The number following the slash (/n) is the prefix length, which is the number of shared initial bits, counting from the left side of the address. The /n number can range from 0 to 32, with 8, 16, 24, and 32 being commonly used numbers. Examples: 123.45.678.12/16: Specifies all IP addresses that start with 123.45. 123.45.678.12/24: Specifies all IP addresses that start with 123.45.678. Specify the range of IP addresses in the From IP address - To IP address format. For example: 123.45.678.12 - 123.45.678.15: Specifies all IP addresses in the range 123.45.678.12 to 123.45.678.15. Specify the port number on which the proxy server is listening. By default, the port is 5750.
Delete a Proxy Server	Select the Proxy Server you want to delete. Click Delete, then click OK.

Task

Details

Add a Proxy Server

Click Add to display the Add Proxy Settings dialog box.
Fill in the following fields:

Proxy: Specify the IP address or DNS name of the proxy server.

IP Address Range: Specify the IP addresses of the devices you want to remotely manage through the proxy server. You can specify the IP address range in one of the following ways:
- Specify the range of IP addresses using CIDR (Classless Inter-Domain Routing) notation. With CIDR, the dotted decimal portion of the IP address is interpreted as a 32-bit binary number that has been broken into four 8-bit bytes. The number following the slash (/n) is the prefix length, which is the number of shared initial bits, counting from the left side of the address. The /n number can range from 0 to 32, with 8, 16, 24, and 32 being commonly used numbers. Examples:
  
  123.45.678.12/16: Specifies all IP addresses that start with 123.45.
  
  123.45.678.12/24: Specifies all IP addresses that start with 123.45.678.
- Specify the range of IP addresses in the From IP address - To IP address format. For example:
  
  123.45.678.12 - 123.45.678.15: Specifies all IP addresses in the range 123.45.678.12 to 123.45.678.15.
- Specify the port number on which the proxy server is listening. By default, the port is 5750.

Delete a Proxy Server

Select the Proxy Server you want to delete.
Click Delete, then click OK.

Remote Management Settings

Service Settings

Session Settings

Performance Settings During Remote Session

Proxy Settings

Diagnostics Applications