1. In the WebAdmin Console, click User Settings > Wireless Email > Novell GroupWise.

2. On the Novell GroupWise Access tab, click Edit.

   

   The steps in this procedure guide you through creating the default profile for a GroupWise server. If you have groups of users that you want to have settings different from the default, you can repeat this procedure multiple times, as described in Section 3.5.5, Creating Multiple Profiles.

3. In the Server Name field, specify the POA’s IP address or DNS hostname.

   Additional fields appear on the Novell GroupWise Access tab.

   

4. In the Port field, specify the SOAP port if it is different from the one you specified for the GroupWise authentication source.

5. Select Use SSL if the POA is configured to require a secure SSL connection with GroupWise Mobile Server, as described in Section 2.2, Enabling POAs for SOAP.

6. Specify a valid GroupWise username and password, so that GroupWise Mobile Server can connect to your GroupWise system.

7. Continue with Configuring GroupWise Mobile Server Access to GroupWise.

1. Under the Access GroupWise Using heading on the Novell GroupWise Access tab, select how you want GroupWise Mobile Server to authenticate to the POA.

   

   Same Account Used to Access Intellisync Mobile Suite: Select this option if you want GroupWise Mobile Server to use the same usernames that users are already using to access GroupWise. This is the recommended option.

   Separate GroupWise Account: This option provides an additional layer of security by having your mobile device provide a generic GroupWise password to GroupWise Mobile Server. GroupWise Mobile Server then prompts you for your personal GroupWise password each time synchronization is required. However, the Trusted Application option provides this additional layer of security much more conveniently. Therefore, the Separate GroupWise Account option is not recommended unless you require the additional security and would prefer not to set up GroupWise Mobile Server as GroupWise trusted application.

   Trusted Application: To review the benefits of setting up GroupWise Mobile Server as a GroupWise trusted application, see Trusted Applications in System in the GroupWise 7 Administration Guide. For instructions to set up GroupWise Mobile Server as a trusted application, see Section 3.8.1, Creating a Trusted Application on Linux.

   If you want to use this access method, you must select the first access method for your initial configuration. After you have started GroupWise Mobile Server and set up GroupWise Mobile Server as a trusted application, then repeat this procedure to select this option and specify the trusted application key.

2. Click Save to save the access settings for the default profile.

3. Continue with Configuring User Options.

1. Continuing under User Settings > Wireless Email > Novell GroupWise, click the Novell GroupWise User Settings tab, then click Edit.

   

2. Select the first three options.

3. If you want more information about these options, click Help.

4. Continue with Configuring GroupWise Address Book Synchronization.

1. Under the Address Book Sync heading on the Novell GroupWise User Settings tab, select how you want to synchronize the GroupWise Address Book to the GroupWise Mobile Server Web PIM, where users select the GroupWise PIM data that will be synchronized to their mobile devices.

   NOTE:In GroupWise Mobile Server, the GroupWise Address Book is referred to as the “system address book” or the “global address list”.

   

2. If you do not want to synchronize the full GroupWise Address Book to the Web PIM, select Don’t Sync System Address Book.

   In the Web PIM, users can still select the personal address book to which their Contacts folder is mapped. Typically, this is the Frequent Contacts address book. Users can map a different address book to the Contacts folder if they would prefer a different personal address book rather than the Frequent Contacts address book. For more information, see Section 6.3, Using the Web PIM to Configure Device Synchronization Settings.

3. If you have selected or created GroupWise distribution lists that contain subsets of the GroupWise Address Book, as described in Section 2.4, Using Distribution Lists for Address Book Synchronization, complete the following steps:

   1. Select Sync the Members of These Distribution Lists.

      

   2. Click Show Available Lists.

      

   3. Specify a valid GroupWise username and password so that GroupWise Mobile Server can log into the post office and retrieve a list of available GroupWise distribution lists.

   4. Select distribution lists in the Available List, then click Add to move them to the Synchronized List.

      The selected GroupWise distribution lists will be synchronized to the Web PIM.

4. If you want to synchronize the full GroupWise Address Book to the Web PIM, select Sync Entire System Address Book.

5. If you want users to be able to override your synchronization setting when they use the Web PIM, select the check box to the right of the Address Book Sync heading in the Allow User Override column.

6. Click Save to save the address book synchronization settings for the default profile, then click Done.

7. If you want all users to use the default profile, skip to Section 3.6, Completing the GroupWise Mobile Server Installation

   or

   If you want to create multiple customized profiles, so that different users can have different settings, continue with Creating Multiple Profiles.

   or

   If you have just created a customized profile, return to Step 5 in Creating Multiple Profiles.

After creating the default profile:

1. On the Novell GroupWise Access tab, click To Assign Different Settings to Particular Users or Groups, Click Here.

2. Click Create New Setting.

3. In the Setting Name field, specify a meaningful name for the customized profile.

   This can be any name you want. For example, if you want them to access a different POA, you might want to include the name of the post office that the POA services.

4. Return to Step 3 in Section 3.5.1, Providing Server Information to create the customized profile, then return to this point.

5. Observe that your customized profile has been added to the list.

   

   The Settings field displays the name of the profile that you defined in Step 3 above.

6. Assign users and groups to the first customized profile:

   1. In the Assigned Users field for the new profile, click Modify, assign users to the customized profile as needed, then click Done.

   2. In the Assigned Groups field for the new profile, click Modify, assign groups of users to the customized profile as needed, then click Done.

   3. When you are finished assigning users and groups to the first customized profile, click Create New Setting to create additional customized profiles as needed.