13.0 WebAccess Agent Error Messages
WEBACC: CMC encountered a problem accessing the GroupWise domain
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not access the GroupWise domain in which its gateway directory is located.
Possible Cause:
The WebAccess Agent was not started with the /ph switch.
Possible Cause:
The WebAccess Agent lost its connection to the domain directory or does not have sufficient rights in the directory structure.
WEBACC: CMC was not able to access this GroupWise gateway directory
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not access its gateway directory in domain directory (domain\wpgate\webac80a, where domain is the domain directory and webac80a is the gateway directory).
Possible Cause:
The WebAccess Agent does not have sufficient rights in the domain directory structure.
WEBACC: CMC was not able to establish a connection to the post office
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not connect to the WebAccess user’s post office.
Possible Cause:
The WebAccess Agent lost its direct connection (UNC path or mapped drive) to the post office directory or does not have sufficient rights in the directory structure.
Possible Cause:
The WebAccess Agent lost its TCP/IP connection to the Post Office Agent (POA).
Possible Cause:
The WebAccess Agent’s post office link information is not defined correctly in Novell eDirectory.
WEBACC: Conversation timed out
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent automatically logs a user out of GroupWise if he or she does not use GroupWise WebAccess for a certain period of time (the timeout interval). This message indicates that the GroupWise WebAccess user’s session has timed out.
Possible Cause:
The GroupWise WebAccess user did not perform any actions in GroupWise WebAccess during the timeout interval.
WEBACC: Could not start logging thread
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent uses a separate thread other than the regular worker threads for logging. The WebAccess Agent could not open the logging thread.
Possible Cause:
Low memory resources.
Action:
Free up memory or add additional memory.
WEBACC: Error accessing directory
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not access the specified directory.
Possible Cause:
The WebAccess Agent lost its connection to the server where the directory resides or does not have sufficient rights to the directory.
WEBACC: Error accessing startup file
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not access the startup file specified by the @filename switch.
Possible Cause:
The WebAccess Agent does not have the rights needed to access the startup file or the startup file does not exist in the specified location.
Action:
Make sure the WebAccess Agent has rights to the startup file.
Action:
Make sure the startup file is in the same directory as the WebAccess Agent program or that filename includes the full path to the file.
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not view a log file.
Possible Cause:
The WebAccess Agent does not have access to log file directory, or does not have rights to the file.
Action:
Make sure the WebAccess Agent has access to the log file directory and that it has rights to view the file.
WEBACC: GWINTER NLM cannot initialize screen
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent cannot display its agent console.
Possible Cause:
Insufficient memory.
Action:
Free up memory or add additional memory.
WEBACC: GWINTER NLM initialization error: Invalid GWENN5.NLM loaded
Source:
GroupWise WebAccess Agent
Explanation:
GroupWise Agent Engine (gwenn5.nlm) that is currently loaded is the incorrect version for the WebAccess Agent.
Possible Cause:
Another GroupWise agent loaded an earlier version of gwenn5.nlm.
Action:
Unload all GroupWise agents that are running on the server. Start GroupWise WebAccess and restart the other GroupWise agents. Make sure the other GroupWise agents are version 8. If necessary, reinstall the GroupWise WebAccess software to install the correct version of gwenn5.nlm.
WEBACC: Hash value changed
Source:
GroupWise WebAccess Agent
Explanation:
Possible security violation.
Possible Cause:
A user bookmarked a GroupWise WebAccess location then attempted to access it directly from another server.
Action:
Have the user log in through the GroupWise WebAccess login screen.
WEBACC: If necessary, the system will attempt a forced shutdown ...
Source:
GroupWise WebAccess Agent
Explanation:
In one minute, the WebAccess Agent will attempt to shut down even if WebAccess users are still logged in.
Possible Cause:
The WebAccess Agent has been shut down, but one or more worker threads are still processing user requests.
Action:
None.
WEBACC: Invalid command line syntax
Source:
GroupWise WebAccess Agent
Explanation:
The specified syntax is invalid.
Possible Cause:
The wrong startup switch syntax was used when attempting to start the WebAccess Agent.
WEBACC: Invalid log level
Source:
GroupWise WebAccess Agent
Explanation:
The specified log level is not a valid log level.
Possible Cause:
The log level specified by the /loglevel startup switch is not valid.
WEBACC: Invalid startup parameter
Source:
GroupWise WebAccess Agent
Explanation:
The specified startup switch is not a valid switch.
Possible Cause:
A startup switch used on the command line or in the startup file is not valid.
WEBACC: Invalid startup parameter file
Source:
GroupWise WebAccess Agent
Explanation:
The specified file is not a valid startup file.
Possible Cause:
The file is not a text file or does not contain any startup switches.
WEBACC: Invalid startup parameter value
Source:
GroupWise WebAccess Agent
Explanation:
The value for the specified startup switch is not valid.
Possible Cause:
An invalid value was entered with the startup switch on the command line or in the startup file.
WEBACC: Logging: Disk is full - turning file logging off
Source:
GroupWise WebAccess Agent
Explanation:
The disk where the log files are stored is full. File logging will be turned off.
Possible Cause:
The disk is full.
WEBACC: Logging: Error creating file - turning file logging off
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not create the log file, so disk logging is being turned off.
Possible Cause:
The WebAccess Agent does not have rights to create files in the log file directory.
WEBACC: Logging: Error writing to file - turning file logging off
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not write information to the log file, so logging is being turned off.
Possible Cause:
The WebAccess Agent does not have rights to write to files in the log file directory or the disk is full.
Source:
GroupWise WebAccess Agent
Explanation:
A WebAccess user attempted to log in and failed.
Possible Cause:
The user did not enter a valid GroupWise user ID or password.
Action:
Make sure the user knows his or her GroupWise user ID. Make sure the user has a password set on his or her mailbox and knows the password.
WEBACC: Login rejected: No valid password specified
Source:
GroupWise WebAccess Agent
Explanation:
A GroupWise WebAccess user could not log in because he or she did not enter a valid password.
Possible Cause:
The user did not enter a password when logging in.
Action:
Make sure the user knows his or her mailbox password and enters it when logging in.
WEBACC: Login rejected: No valid userid specified
Source:
GroupWise WebAccess Agent
Explanation:
A GroupWise WebAccess user could not log in because he or she did not enter a valid GroupWise user ID.
Possible Cause:
The user did not enter a GroupWise user ID or full name when logging in.
Action:
Make sure the user knows his or her GroupWise user ID and enters it when logging in. Users can also enter their full names as they appear in eDirectory and the GroupWise Address Book.
WEBACC: Login rejected: Password is incorrect
Source:
GroupWise WebAccess Agent
Explanation:
The password specified during login is incorrect.
Possible Cause:
The user entered the wrong password.
Action:
Make sure the user knows his or her mailbox password and enters it when logging in. Passwords are case sensitive.
WEBACC: No gateway alias was specified in NW Admin
Source:
GroupWise WebAccess Agent
Explanation:
The gateway alias type is not defined.
Possible Cause:
The gateway alias was not specified in ConsoleOne during setup.
Action:
Specify a gateway alias type. In ConsoleOne, double-click the WebAccess object, enter an alias in the field, then click . The alias can be the same name as the gateway.
WEBACC: No gateway directory was specified
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent must know the path to its gateway home directory. This path is specified by the /ph startup switch.
Possible Cause:
The /ph startup switch was not used on the command line or in the strtweb.ncf or strtweb.bat file.
WEBACC: No message is currently open
Source:
GroupWise WebAccess Agent
Explanation:
This is an internal diagnostic message.
Possible Cause:
Unknown.
WEBACC: No NetWare password was specified
Source:
GroupWise WebAccess Agent
Explanation:
The GroupWise WebAccess Agent requires an account and password that lets it log in to eDirectory or NetWare servers so that it can access the domain directory and post office directories.
Possible Cause:
The /password startup switch was not used on the command line or does not exist in the strtweb.ncf file.
WEBACC: No NetWare user ID was specified
Source:
GroupWise WebAccess Agent
Explanation:
The GroupWise WebAccess Agent requires an account and password that lets it log in to eDirectory or NetWare servers so that it can access the domain directory and post office directories.
Possible Cause:
The /user startup switch was not used on the command line or does not exist in the strtweb.ncf file.
WEBACC: No UNC path specified for the post office
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent is attempting direct access to a post office and no UNC path is specified.
Possible Cause:
The UNC path is not defined in the post office link information.
WEBACC: Not able to bind to specified port
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not bind to the TCP/IP port it uses to listen for messages from the GroupWise WebAccess CGI Extension.
Possible Cause:
Another program is using the port.
Action:
Resolve the port conflict by changing the port used by the other program or the port used by the WebAccess Agent. To change the WebAccess Agent’s port, see in WebAccess
in the GroupWise 8 Administration Guide.
WEBACC: Not able to open configuration file
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not open the comint.cfg file located in its gateway home directory (domain\wpgate\webac80a, where domain is the domain directory and webac80a is the gateway home directory). The WebAccess Agent reads configuration information from this file.
Possible Cause:
The file has been deleted or has a problem.
WEBACC: Not enough memory to complete operation
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not perform the operation because of insufficient memory.
Possible Cause:
Insufficient memory.
Action:
Free up memory or add additional memory.
WEBACC: Request aborted while waiting on locked conversation
Source:
GroupWise WebAccess Agent
Explanation:
During a conversation (or session), GroupWise WebAccess issues a request whenever the user performs an action in WebAccess. When the WebAccess Agent receives a request, it locks the conversation so that it can process the request. While the conversation is locked, other requests can accumulate. This message indicates a request that was waiting on the locked conversation has timed out.
Possible Cause:
The request for the locked conversation took longer than allowed.
Action:
Have the GroupWise WebAccess user perform the action again (for example, resend the message).
WEBACC: Request rejected because all threads are busy
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not process a request from a WebAccess user because no threads were available.
Possible Cause:
Heavy WebAccess usage for the number of threads allocated to the WebAccess Agent.
WEBACC: Running the agent with conflicting effective users
Source:
GroupWise WebAccess Agent for Linux.
Explanation:
You are starting the WebAccess Agent as a user that is different from the user the WebAccess Agent is configured to run as. The user specified in the uid.conf file does not match the user specified in the uid.run file.
Possible Cause:
The user specified in the uid.conf file has been manually edited.
Possible Cause:
The uid.conf file has been deleted.
WEBACC: Startup file not found
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not find the startup file specified by the @filename startup switch.
Possible Cause:
The startup file is not in the same directory as the WebAccess Agent and filename does not include the complete path to the file.
Action:
Move the startup file to the same directory as the WebAccess Agent or include the full path in the filename (for example @j:\startup\webstart.txt).
WEBACC: TCP socket accept failed
Source:
GroupWise WebAccess Agent
Explanation:
The GroupWise WebAccess CGI Extension tried to start a new session with the WebAccess Agent, but the WebAccess Agent could not handle another session.
Possible Cause:
Insufficient memory.
Action:
Free up memory or add additional memory.
WEBACC: The post office is closed
Source:
GroupWise WebAccess Agent
Explanation:
While processing a request for a user, the WebAccess Agent could not access the user’s post office.
Possible Cause:
Logging in to the post office has been disabled through ConsoleOne.
WEBACC: The system is busy, please try again later
Source:
GroupWise WebAccess Agent
Explanation:
A user tried to log in to GroupWise WebAccess, but the WebAccess Agent could not handle another user.
Possible Cause:
All worker threads are currently being used.
WEBACC: Unable to establish a connection to the default log path
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent could not access the specified log file directory.
Possible Cause:
The WebAccess Agent does not have rights to the directory or does not have access to the file server.
WEBACC: Unable to establish a connection to the log path
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent cannot access the log file directory.
Possible Cause:
The WebAccess Agent does not have rights to the directory or does not have access to the file server.
WEBACC: Unable to find the specified user
Source:
GroupWise WebAccess Agent
Explanation:
The WebAccess Agent cannot find the user in the GroupWise database.
Possible Cause:
When logging in, the user entered an incorrect or invalid user ID.
Action:
Have the user enter a valid user ID or full username (as defined in eDirectory or the GroupWise Address Book) when logging in.
Action:
Have the user try logging in using the full GroupWise username (domain.post_office.userID.
Possible Cause:
The WebAccess servlet has encountered a problem with the username.
Action:
Check the WebAccess Application log for additional error messages. The location of the log file varies by platform.
Source:
GroupWise WebAccess Agent
Explanation:
When communicating, the WebAccess Agent and WebAccess CGI Extension exchange keywords. This message indicates that the keyword given by the WebAccess CGI Extension is not known by the WebAccess Agent.
Possible Cause:
The comint.cfg file used by the WebAccess Agent is out of sync with the commgr.cfg file used by the WebAccess CGI Extension. The WebAccess Agent, WebAccess CGI Extension, HTML templates, and Java applets are not the same version.