Installing iManager 2.0.1 Snap-Ins

iManager is a Windows-based configuration utility that helps you configure virtual private networks and filters on Novell BorderManager 3.8 machines. You need to do some configuration if BorderManager is running on any of the following platforms:


NetWare 5.1 SP6

To configure Novell BorderManager4 3.8 VPN and Filter services on NetWare 5.1 SP6:

  1. Install iManager 2.0.1 on a Windows 2000 or XP machine. To do so, run iManagerInstall.exe located under imanager20\installs\win on the Companion CD.

  2. Configure iManager 2.0.1 by following the steps in the iManager install.

  3. To install iManager snap-ins for Novell BorderManager, run NBM_IM2_Snapin_Install.exe, located under cl_inst\snapins on the main product CD.

  4. Launch iManager. Go to the specific IP address of the Windows machine (https://<ip address>/nps/iManager.html). Authenticate and select VPN or Filtering from the left pane.


NetWare 6 SP3

To configure Novell BorderManager 3.8 VPN and Filter services on NetWare 6 with SP3, do either of the following:

  1. Install iManager 2.0.1 on a Windows 2000 or XP machine as mentioned in NetWare 5.1 SP6 , and run the NBM_IM2_Snapin_Install.exe.

or

  1. Install eDirectory 8.7.1 and JVM 1.4.1 if you do not have them installed already. eDirectory 8.7.1 and JVM 1.4.1 are available on the Companion CD.

  2. Install iManager 2.0.1 on this machine. iManager 2.0.1 for NetWare 6 is available in the Companion CD under IMANAGER20\installs\NW6 directory.

  3. Install the Novell BorderManager 3.8 snap-ins manually. See NetWare 6.5 with iManager 2.0 for details.


NetWare 6.5 with iManager 2.0

NetWare 6.5 comes with iManager 2.0 by default. To work with Novell BorderManager 3.8, either select the snap-ins during Novell BorderManager 3.8 installation, manually install them later, or use a iManager 2.0.1 on a Windows machine.

To use a Windows machine, see NetWare 5.1 SP6 .

To manually install the snap-ins:

  1. Launch iManager 2.0 on the browser. Go to the specific IP address of the NetWare 6.5 machine (https://<ip address>/nps/iManager.html).

  2. Click the Configure tab on the top of the iManager interface, then select iManager Configuration > Modules on the left pane. The page will look like this:

    Figure 4
    iManager Modules

  3. Click Install, then select the VPN snap-in NPM file. The VPN snap-in is available in the VPN directory at the root of the main product download. The name of the snap-in is vpn.npm.

    NOTE:  To install Firewall snap-ins, follow the steps mentioned above but select BM.NPM from the Border directory at the root of this Web download.

  4. Restart Tomcat on the NetWare 6.5 server.