38.0 NDPSM Messages

The following includes messages from NDPSM.NLM.

NDPSM-X-13: Insufficient memory is available for the NDPS Manager to initialize the Printer Agents.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-15: An error occurred while creating a new display portal. This is usually due to a low memory condition.

Source: NDPSM.NLM
Explanation: NDPS® Manager was unable to create a new display portal.
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-23: Insufficient memory is available to allocate a resource tag for the NDPS Manager user interface.

Source: NDPSM.NLM
Possible Cause: NDPS Manager's user interface could not initialize because memory at the server was not sufficient to allocate a resource tag.
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-33: Printer Agent name already exists.

Source: NDPSM.NLM
Possible Cause: You are trying to give a Printer Agent a name that is already in use.
Action: Use a unique name.

NDPSM-X-37: The NDPS Manager has lost its connection to queue <name>.

Source: NDPSM.NLM
Possible Cause: One of the following events probably occurred: a router went down, the volume the queue is on was dismounted, or the server that has the volume with the queue went down.
Action: Check the status of your routers, the queue volume, and the server.

NDPSM-X-76: Error code occurred while reporting an event for Printer Agent agent_name to the notification service.

Source: NDPSM.NLM
Explanation: NDPS Manager was unable to report an event at the specified Printer Agent to the notification service.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell® support provider.

NDPSM-X-77: The PDS Gateway associated with Printer Agent <agent_name> refused a reply with error code <code>. The Printer Agent will be shut down.

Source: NDPSM.NLM
Possible Cause: An internal program error caused the reply to be refused. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-95: Error <code> occurred while attempting to log in to the network. Access to the network is denied.

Source: NDPSM.NLM
Possible Cause: NDPS Manager was not able to log in to the network because error code was returned during the attempt.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-96: Error <code> occurred while attempting to read the local volume name from volume <volume_name>.

Source: NDPSM.NLM
Explanation: An internal error prevented NDPS Manager from reading the volume attribute for the volume specified in the message.
Possible Cause: This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-97: Error <code> occurred while reading a Directory Services context.

Source: NDPSM.NLM
Explanation: An internal error prevented NDPS Manager from reading the NDS® context.
Possible Cause: This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-100: Insufficient memory is available to add information portal help.

Source: NDPSM.NLM
Possible Cause: The NDPS Manager was unable to add information portal help because of insufficient memory at the server.
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-104: Error <code> occurred while creating the NDPS Manager database.

Source: NDPSM.NLM
Explanation: NDPS Manager was unable to create the database because an error code was returned.
Possible Cause: This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation.

NDPSM-X-105: Error <code> occurred while changing job storage volume.

Source: NDPSM.NLM
Possible Cause: NDPS Manager was unable to change the job storage volume due to error code.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-106: Insufficient memory is available to initialize the NDPS Manager.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-107: The NDPS Manager is unable to prompt for a password. This is usually due to a low memory condition.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-108: Error <code> occurred while attaching to queues associated with printer <printer_name>.

Source: NDPSM.NLM
Possible Cause: An internal error stopped the NDPS Manager from attaching to the queue that is associated with the specified printer.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-109: The NDPS Manager is unable to create the queue polling process. This is usually due to a low memory condition.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-114: There was not enough room on volume volume_name to transfer the jobs. The operation was aborted.

Source: NDPSM.NLM
Possible Cause: NDPS Manager was unable to transfer the print jobs to volume volume_name because of a temporary lack of disk space.
Action: Try the task again. You might need to free up some space on the volume.

NDPSM-X-116: The Gateway bound to this Printer Agent has refused the request to rename the Printer Agent. It will be necessary to unload the Gateway in order to rename this Printer Agent.

Source: NDPSM.NLM
Possible Cause: Some gateways have an internal dependency on the Printer Agent name that existed when the gateway bound to the Printer Agent. It will refuse a rename request for the Printer Agent while it continues to be bound to that Printer Agent.
Action: Unload the gateway and rename the Printer Agent, then load the gateway again. (You can do this from the command line.)

NDPSM-X-121: Error code occurred while initializing the DPLSV386 library. Reported version: <version> Expected version: version

Source: NDPSM.NLM
Possible Cause: Possible causes include an incorrect, outdated, or incompatible version of the library. It could also be caused by a low memory condition.
Action: Refer to the explanation that is displayed along with this message.

NDPSM-X-128: Error code occurred while attempting to find the next printer agent. The NDPS Manager will continue to load and service the printer agents that it has already initialized.

Source: NDPSM.NLM
Possible Cause: The NDPS database and index files might not be synchronized.
Action: From the Database Options menu, select the Resynchronize Database File option. If the database fails to resynchronize, contact your Novell support provider. For information about the specific error code, search the Error Codes online documentation.

NDPSM-X-154: The database file and index file associated with the NDPS Manager Database are not synchronized. You may select the Resynchronize Database Files option in the following menu to generate a new Index file.

Source: NDPSM.NLM
Action: From the Database Options menu, select the Resynchronize Database File option. If the database fails to resynchronize, contact a Novell support provider.

NDPSM-X-163: Error code occurred while renaming the printer agent.

Source: NDPSM.NLM
Possible Cause: An internal error stopped the process. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-169: Medium medium selected to be removed as a supported medium is being referenced and can not be removed.

Source: NDPSM.NLM
Possible Cause: You attempted to delete the medium currently selected.
Action: Select a different medium to be the current medium, then delete the other one.

NDPSM-X-190: Error code occurred while initializing a printer agent. (NDPS Manager internal printer agent ID ID_number).

Source: NDPSM.NLM
Possible Cause: An internal error prevented the Printer Agent from initializing. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-192: Error code occurred while creating printer agent name.

Source: NDPSM.NLM
Possible Cause: An internal error prevented creating the Printer Agent. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-193: The NDPS Manager was unable to reopen its database.

Source: NDPSM.NLM
Action: Unload the NDPS Manager and then reload it.

NDPSM-X-194: Error code occurred while deleting printer agent name.

Source: NDPSM.NLM
Possible Cause: An internal error prevented deleting the Printer Agent. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-196: The NDPS Manager was unable to launch the housekeeping process. This is usually due to a low memory condition.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-197: Error code occurred while accessing the NDPS Manager database. The NDPS Manager cannot continue without access to its database. The NDPS Manager will be unloaded.

Source: NDPSM.NLM
Possible Cause: An internal error stopped access to the database. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-199: Error code occurred while initializing the Managed Object database.

Source: NDPSM.NLM
Possible Cause: An internal error prevented the database from initializing. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-200: A low memory error occurred while initializing the Job Production Manager.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide. For information about the specific error code, search the Error Codes online documentation.

NDPSM-X-204: The NDPS Manager was unable to initialize an NDS context.

Source: NDPSM.NLM
Explanation: An unspecified error prevented the NDPS® Manager from initializing an NDS® context.
Action: If you are unable to resolve the problem, contact your Novell support provider.

NDPSM-X-205: Insufficient memory is available to initialize the NDPS Manager process list.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-206: Error code occurred while reading the database volume name from NDS.

Source: NDPSM.NLM
Possible Cause: An internal error prevented the NDPS Manager from reading the name. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-207: Error code occurred while reading the database directory path from NDS.

Source: NDPSM.NLM
Possible Cause: An internal error prevented the NDPS Manager from reading the path. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-208: Error code occurred while changing the current scheduler.

Source: NDPSM.NLM
Possible Cause: An internal error prevented the NDPS Manager from changing the scheduler. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-215: The NDPS Manager was unable to load the port handler for printer agent <name>.

Source: NDPSM.NLM
Possible Cause: The Port Handler does not have sufficient rights.
Action: Verify that the Executable Parameter attributes for the Port Handler are set correctly.

NDPSM-X-222: The index file associated with the NDPS Managers database is corrupt. You may select the Resynchronize Database Files option in the following menu to generate a new index file.

Source: NDPSM.NLM
Action: From the Database Options menu, select the Resynchronize Database File option. If the database fails to resynchronize, contact a Novell support provider.

NDPSM-X-237: Error code occurred while opening file filename.

Source: NDPSM.NLM
Possible Cause: An internal error prevented the NDPS Manager from opening the file. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-244: Error code occurred attempting to delete file filename.

Source: NDPSM.NLM
Possible Cause: An internal error prevented the NDPS Manager from deleting the file. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-247: The volume that contains the database for NDPS Manager name is on a remote server or is not mounted. Remote database access is not currently supported.

Source: NDPSM.NLM
Action: Mount the volume containing the database on a local server.

NDPSM-X-248: Error code was returned attempting to delete job <job_name>.

Source: NDPSM.NLM
Possible Cause: An internal error prevented the NDPS Manager from deleting the print job. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-251: Error code occurred registering public access printer printer with the Service Registry Service.

Source: NDPSM.NLM
Possible Cause: An internal error stopped the NDPS Manager from registering the printer. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-265: Error code occurred while initializing the user interface.

Source: NDPSM.NLM
Possible Cause: An internal error stopped the NDPS Manager from initializing the interface. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-266: An error occurred while creating the key line. This is usually due to a low memory condition.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-267: An error occurred while creating the information portal. This is usually due to low memory condition.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-268: The NDPS Manager is unable to create the console background process. This is usually due to low memory condition.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-270: The NDPS Manager name cannot be found. Verify that the complete NDPS Manager name is used. For example: LOAD NDPSM .PSM-ACCOUNTING.ACCOUNTING.NOVELL

Source: NDPSM.NLM
Explanation: The specified NDPS Manager name does not exist.
Action: Reenter the command using a complete name.

NDPSM-X-271: Printer Agent name failed to bind to a notification service.

Source: NDPSM.NLM
Explanation: This is a warning message. A notification service will be automatically loaded when one becomes available.

NDPSM-X-272: The NDPS Manager was unable to create the client request manager process. This is usually due to a low memory condition.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-279: Error <code> occurred while setting the password generated by the NDPS Manager.

Source: NDPSM.NLM
Possible Cause: An internal error prevented setting the password. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-280: Error <code> occurred while creating a service registry reference.

Source: NDPSM.NLM
Possible Cause: An internal error prevented the NDPS Manager from creating the reference.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-281: The NDPS Manager was unable to launch the connection monitoring process. Lost connections to the Notification Service, the Service Registry Service, and the Resource Management Service will not be restored.

Source: NDPSM.NLM
Action: Unload and then reload the NPDS Manager.

NDPSM-X-282: Error <code> occurred while accessing Directory Services.

Source: NDPSM.NLM
Possible Cause: An internal error stopped the NDPS Manager from accessing eDirectory™. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-283: Unicode translation error code occurred.

Source: NDPSM.NLM
Possible Cause: An internal error stopped the NDPS Manager from translating the Unicode*. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-284: Error code occurred while creating document file <filename>.

Source: NDPSM.NLM
Possible Cause: An internal error stopped the NDPS Manager from creating the file. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-296: The NDPS Manager was unable to submit a task to the housekeeping process. This is due to a low memory condition.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-298: Error code occurred while writing data to a document file.

Source: NDPSM.NLM
Possible Cause: An internal error prevented the NDPS Manager from writing the data. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-299: Error code occurred while registering Printer Agent <name> with the Service Registry Service.

Source: NDPSM.NLM
Possible Cause: An internal error stopped the NDPS Manager from registering the Printer Agent. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-311: Error code was returned by the configuration utility. No changes were saved.

Source: NDPSM.NLM
Possible Cause: An internal error prevented the configuration from being saved. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-314: The selected job (ID identifier) is no longer active.

Source: NDPSM.NLM
Possible Cause: The user is trying to delete a job that has finished printing.

NDPSM-X-315: The NDPS Manager database index file was truncated. You may select the "Resynchronize Database Files" option in the following menu to generate a new index file.

Source: NDPSM.NLM
Possible Cause: This could be the result of a programming error, hard drive corruption, or an abend with TTS disabled, which may have corrupted the database.
Action: Go to the Database Options menu and try to resynchronize the database from there. If this fails, use the Restore Database function from the Backup option.

NDPSM-X-317: The NDPS Manager database data file was truncated. You will need to restore the database from a backup.

Source: NDPSM.NLM
Possible Cause: The database data file has been corrupted.
Action: Restore the database file from a backup copy.

NDPSM-X-318: The NDPS Manager was unable to read the database index file.

Source: NDPSM.NLM
Possible Cause: The index file may have become corrupted.
Action: Go to the Database Options menu and try to resynchronize the database from there. If this fails, use the Restore Database function from the Backup option.

NDPSM-X-319: The DPLSV386 library was unable to create an accessorRef. This is usually due to a low memory condition.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-321: Error <code> occurred while attempting to give the broker rights to Directory Services printer object printer_name. This will effect notification.

Source: NDPSM.NLM
Possible Cause: The Broker was unable to manipulate the Notification Consumers and Notification Profile attributes. An internal error may have prevented rights from being assigned to the Broker. This could be a problem in the program itself.
Action: Try to assign Supervisor rights to the NDS Broker object. For information about the specific error code, search the Error Codes online documentation. If you are able to resolve the error,

NDPSM-X-327: The NDPS Manager was unable to load the requested scheduler for Printer Agent <name>. The "first in, first out" scheduler was used in its place.

Source: NDPSM.NLM
Action: None. The job will be completed according to the default scheduler.

NDPSM-X-328: Error code occurred trying to delete the NDPS Manager database files.

Source: NDPSM.NLM
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-329: Insufficient memory is available to create a list of Printer Agents.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-330: Error <code> occurred attempting to shutdown the Printer Agent.

Source: NDPSM.NLM
Possible Cause: An internal error prevented shutting down the Printer Agent. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-332: Insufficient memory is available to create a list of Printer Agent status details.

Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-334: Error code was returned attempting to <operation>.

Source: NDPSM.NLM
Possible Cause: An error was returned during the operation shown in the message.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-335: Error code occurred attempting to change the current medium.

Source: NDPSM.NLM
Possible Cause: An internal error prevented changing the medium. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-336: Error code occurred adding a medium to the supported media list.

Source: NDPSM.NLM
Possible Cause: An internal error prevented adding the medium. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-339: Error code occurred while rebuilding the NDPS Managers database.

Source: NDPSM.NLM
Possible Cause: An internal error prevented the database from being rebuilt. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-340: Error code occurred changing the job wait time.

Source: NDPSM.NLM
Possible Cause: An internal error prevented changing the time. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-341: Error <code> occurred attempting to load module name.

Source: NDPSM.NLM
Possible Cause: An internal error prevented loading the module. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-342: Error code was returned attempting to save the information returned by the configuration utility.

Source: NDPSM.NLM
Possible Cause: An internal error prevented information from being saved. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-344: Error <code> occurred changing job space limits.

Source: NDPSM.NLM
Possible Cause: An internal error prevented information from being saved. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-345: The job storage volume for printer agent name could not be accessed. The printer agent was shut down.

Source: NDPSM.NLM
Explanation: The storage volume for the specified Printer Agent has been dismounted.
Action: Remount the storage volume.

NDPSM-X-346: Volume volume_name is not accessible, printer agent agent_name was not initialized.

Source: NDPSM.NLM
Explanation: The specified volume has been dismounted.
Action: Remount the volume.

NDPSM-X-347: Error code occurred attempting to load module.

Source: NDPSM.NLM
Possible Cause: An internal error prevented the module from loading. This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-348: Printer Agent name was unable to allocate memory and was shutdown.

Source: NDPSM.NLM
Possible Cause: The server has insufficient memory available.
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-349: Error code occurred while Printer Agent <name> was opening job <job>.

Source: NDPSM.NLM
Possible Cause: A file I/O error has probably occurred.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-350: The NDPS Manager does not support autoloading of port handlers on SFT III servers. This must be done from the system console.

Source: NDPSM.NLM
Action: SFT™ III™ is not supported by NDPS.

NDPSM-X-351: Error code occurred while creating the portal.

Source: NDPSM.NLM
Possible Cause: The server is out of memory.
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

For information about the specific error code, search the Error Codes online documentation.

If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-358: Error <code> occurred while saving a backup of the NDPS Manager database files.

Source: NDPSM.NLM
Possible Cause: A file I/O error has probably occurred.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-366: The NDPS Manager is unable to automatically back up its database.

Source: NDPSM.NLM
Possible Cause: The server is out of memory.
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NDPSM-X-370: There is no backup to restore from.

Source: NDPSM.NLM
Possible Cause: The NDPS Manager database was not previously backed up, so a database restore cannot be performed.
Action: None. If a backup copy does not exist, there is no way to restore the database. In the future, be sure to back up the NDPS Manager database.

NDPSM-X-373: Error code occurred while initializing the NDPS Manager.

Source: NDPSM.NLM
Possible Cause: This may be an eDirectory problem.
Action: Run DSREPAIR and try again. For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-379: Error code occurred while trying to discover supported protocols. Make sure that at least one transport protocol is loaded.

Source: NDPSM.NLM
Possible Cause: Neither the IP nor the IPX™ protocol is currently bound to the network card.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-392: Error code accessing file server name. This is the file server that currently has the database.

Source: NDPSM.NLM
Possible Cause: The NDPS Manager uses a database that must be on the local file server. Currently, the NDPS Manager’s database is stored on a remote file server that cannot be accessed.
Action: If you have configured the NDPS Manager for automatic database backup, try to restore the database from a backup stored in eDirectory. Existing jobs will be lost, but the need to contact the remote file server is removed. For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-394: The NDPS Manager name is currently running on another file server.

Source: NDPSM.NLM
Possible Cause: You specified an NDPS Manager that is not running on the local server.
Action: Either specify an NDPS Manager on the local server, or designate the server the NDPS Manager is running on.

NDPSM-X-396: Error <code> occurred attaching to file server name.

Source: NDPSM.NLM
Possible Cause: A connection cannot be established with the file server you specified. This problem could have a variety of possible causes.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-397: Error code occurred while moving the NDPS Manager.

Source: NDPSM.NLM
Possible Cause: A connection problem may account for this failure.
Action: For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-400: Error code occurred selecting the volume to receive the database.

Source: NDPSM.NLM
Possible Cause: Error code occurred selecting the volume to receive the database.The volume you tried to select is not available.
Action: Make sure you specified a volume that exists. For information about the specific error code, search the Error Codes online documentation. If you are unable to resolve the error, contact your Novell support provider.

NDPSM-X-401: The object name that was selected is not an NDPS Manager.

Source: NDPSM.NLM
Possible Cause: This error may simply be the result of a typing mistake made by the user at the command line. It could also occur if the eDirectory volume object associated with the NDPS Manager has been deleted, in which case eDirectory will change the NDPS Manager to an unknown object.
Action: Make sure you have typed the command correctly. If this is not the problem and the volume has been deleted, you will need to associate an NDPS Manager with an existing volume and re-create the printers that were assigned to it.

NDPSM-X-402: The NDPS Manager was unable to initialize the protocol_name protocol.

Source: NDPSM.NLM
Possible Cause: The protocol stack did not initialize. Your server could have insufficient memory, or there could be a problem with the protocol stack itself.
Action: Make sure the server has sufficient memory, then retry the operation. For information on resolving memory problems, see Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide. If memory is not the problem, refer to the documentation for the protocol stack for troubleshooting or debugging information.