44.0 NLMLIB Messages

The following includes messages from NLMLIB.NLM.

NLMLib-X-013: RegisterTrackedResource() for Service Advertising failed, rc=number. An internal system error has occurred. There may not be enough server memory, or server memory may be corrupted.

Source: NLMLIB.NLM
Explanation: A call to RegisterTrackedResource() failed. The NLMLIB.NLM program cannot load at this time due to memory constraints.
Action: Increase the memory available to the server. See Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NLMLib-X-015: RegisterTrackedResource() for Remote Server Sessions failed, rc=number. An internal system error has occurred. There may not be enough server memory, or server memory may be corrupted.

Source: NLMLIB.NLM
Explanation: A call to RegisterTrackedResource() failed. The NLMLIB.NLM program cannot load at this time due to memory constraints.
Action: Increase the memory available to the server. See Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NLMLib-X-022: An error occurred loading the NLM with the /P option. There was insufficient server memory available.

Source: NLMLIB.NLM
Explanation: A call to Alloc() failed. The NLMLIB.NLM program cannot load at this time due to memory constraints.
Action: Increase the memory available to the server. See Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

NLMLib-X-023: An invalid namespace was specified using the /N option. Only the namespace strings DOS, MAC, NFS, FTAM and OS2 are valid.

Source: NLMLIB.NLM
Explanation: You specified an invalid namespace with the /N option.
Action: Try again, using valid namespace syntax. If the problem persists, contact the vendor of this NLM program or contact a NetWare support provider.

NLMLib-X-024: Login using the /S option loading the NLM failed: rc = number. An incorrect username or password may have been used in the login process.

Source: NLMLIB.NLM
Explanation: This message might appear because an incorrect username or password was used. This error also might appear because of a hardware, cabling, or insufficient memory problem.
Action: Try the login again, making sure the username and password are valid. Check the hardware and cabling.

If the error occurs due to a memory problem on the server, increase the memory available to the server. See Freeing Server Memory Temporarily in the NW 6.5 SP8: Server Operating SystemAdministration Guide.

If the problem persists, contact the vendor of this NLM program or contact a NetWare support provider.

NLMLib-X-026: Select() overflow detected.

Source: NLMLIB.NLM
Explanation: NetWare detected a potential overflow but averted it.
Action: This message is for information only.