25.6 Verifying Migration

After migration is complete, the desired Print Manager on the target server must be active.This ensures that the migration has been successfully completed. Use the procedures in this section to check for the Print Manager and printers.

IMPORTANT:If the print manager is in the down state after migration, see Section 25.8, Troubleshooting iPrint Migration.

25.6.1 Using iManager

  1. Open iManager on the target server

  2. Go to iPrint > Manage Print Manager

  3. Specify the iPrint Manager name or NDPS Manager name.

  4. Click OK. The print manager status must be Active.

  5. Click Printer Agents.

    Depending on your setup it may take some time to display the printers on the target server.

25.6.2 Using the Command Line

  1. At the console, enter the command iprintman psm -l -u admin

  2. Enter the admin password when prompted.

    This displays all of the Print Managers with their status. Ensure that the desired Print Manager is Active.

  3. At the console, enter the command iprintman printer -l -u admin

  4. Enter the admin password when prompted.

    This displays the printers on the target server.