Novell Doc: Novell ZENworks 7.3 Linux Management Administration Guide

F.7 Variables and Parameters

The following sections describe the variables and parameters used in updating resource files:

The following environment variables are used in imaging scripts and must not be modified:

Table F-1 Imaging Script Variables

Variable	Definition
ACTIVEPARTITION	Device of the active OS partition.
CDBOOT	YES = Booted from a CD.
DISABLEZEN	1 = Disable the ZENworks partition.
ENABLEZEN	1 = Re-enable the ZENworks partition.
ZENDEVICE	Device name of the ZENworks partition.
ZENPARTBOOT	YES = Booted from ZENworks partition.

The following environment variables can be modified or set in the settings.txt file:

Table F-2 Environment Variables

Variable	Definition
HDPARM	NO = Do not set hdparm parameters.
IMGCMD	Imaging command to run instead of the img a command.
MANUALREBOOT	YES = Do not automatically reboot.
PARTITIONSIZE	Size in MB to create the ZENworks partition.
PROXYADDR	IP/DNS address of the Imaging server.
PROMPT	Go to the bash prompt after imaging is complete.

Table F-3 Linuxrc Parameters

Variable	Definition
netsetup	dhcp = Use DHCP. 1 = Static IP.
HostIP	Static IP address to use.
NetMask	Network mask.
Gateway	Network gateway.
HostName	Host name to assign.
Nameserver	DNS name server.
Domain	Domain suffix.
NetDevice	ethx = Define which network device to configure.

Table F-4 Image Engine Variables

Variable	Definition
DEVELOPER_LOG	“A” creates a verbose imglog debug file.
ZENIMGLOG	“A” creates a less verbose imglog debug file.
ZEN_IGNORE_GEO_MISMATCH	Ignore geometry device mismatches when restoring raw image formats.
NOABORTBUTTON	If defined, do not display the Abort button during imaging.