9.1 Novell iManager and Storage-Related Plug-Ins

Novell iManager is a Web browser-based tool used for configuring, managing, and administering NetIQ eDirectory objects on your network. The Storage plug-in is the primary tool used to manage NSS devices, software RAIDs, pools, and volumes.

Novell iManager gives you the ability to assign specific tasks or responsibilities to user accounts and to present the user with only the tools (with the accompanying rights) necessary to perform those sets of tasks.

NOTE:The storage-related plug-ins do not support Mobile iManager.

This section describes the following:

9.1.1 Understanding Storage-Related Plug-Ins

Storage-related plug-ins share some management code in common. It is necessary to manage these plug-ins together when installing or updating any of the plug-ins.

Overview of the Storage-Related Plug-Ins for iManager

Table 9-1 identifies the storage-related plug-ins for Novell iManager 2.7.4 in OES 2 SP2 and later.

Table 9-1 Storage-Related Plug-Ins for iManager

Storage-Related Plug-In	NPM File	Role in iManager	Use to Manage
Archive Versioning Management	arkmgmt.npm	Archive Versioning	Novell Archive and Version Services
Cluster Services Management	ncsmgmt.npm	Clusters	Novell Cluster Services
Distributed File Services Management	dfsmgmt.npm	Distributed File Services	Novell Distributed File Services
Files and Folders Management	fileman.npm	Files and Folders	Novell Files and Folders
AFP Management	afpmgmt.npm	File Protocols > AFP	Novell AFP for Linux Novell AFP for NetWare
CIFS Management	cifsmgmt.npm	File Protocols > CIFS	Novell CIFS for Linux Novell CIFS for NetWare
Samba Management	sambamgmt.npm	File Protocols > Samba	Novell Samba
NSS Management	nssmgmt.npm	Storage	Novell Storage Services
Storage Management	storagemgmt.npm	No role. Required when using any combination of storage-related plug-ins	Contains common code for all storage-related plug-ins

IMPORTANT:The storage-related plug-ins share code in common in the storagemgmt.npm file. If you use more than one of these plug-ins, you should install, update, or remove them all at the same time to make sure the common code works for all plug-ins. If you remove only one of the plug-ins, it removes the common code and breaks the remaining installed plug-ins.

Archive Versioning Management

The Archive Versioning Management (arkmgmt.npm) file contains the Archive Versioning plug-in for Novell Archive and Version Services. This plug-in requires the NSS Storage Management plug-in and the Storage Management plug-in.

For information about using this plug-in, see the OES 11 SP3: Novell Archive and Version Services Administration Guide.

Cluster Services Management

The Cluster Services Management (ncsmgmt.npm) file contains the Clustering plug-in for managing Novell Cluster Services. This plug-in requires the Storage Management plug-in. The NSS Storage Management plug-in is required for cluster-enabling NSS pools and volumes.

For information about using this plug-in, see OES 11 SP3: Novell Cluster Services for Linux Administration Guide.

Distributed File Services Management

Use the Distributed File Services plug-in to manage Novell DFS for NSS volumes. The DFS plug-in also requires the NSS Storage Management and Storage Management plug-ins.

For information about using the DFS plug-in, see OES 11 SP3: Novell Distributed File Services Administration Guide for Linux.

Files and Folders Management

Provides a file tree view for managing and browsing files and NetIQ eDirectory objects.

When NCP Server is installed, this plug-in supports the Novell Trustee Model of access control for Novell Storage Services (NSS) volumes on Linux and NetWare and for NetWare Core Protocol volumes on Linux POSIX file systems. Use it to manage the file system trustees, trustee rights, and inherited rights filters for files and folders on NSS and NCP volumes. On Linux, install the NCP Server and Dynamic Storage Technology service. On NetWare, the NCP Server service is automatically installed.

For file systems that have Volume objects in eDirectory, this plug-in allows you to upload, download, and delete files and to create and delete directories. For NSS volumes, it provides additional features that allow you to manage file system attributes, to salvage and purge deleted files and folders, and to manage directory quotas.

File Protocols Management (AFP and CIFS)

Beginning in OES 2 SP2, the File Protocols plug-in for the Native File Access Protocols for NetWare services has been replaced by two plug-ins: Novell AFP (afpmgmt.npm) and Novell CIFS (cifsmgmt.npm). These plug-ins support AFP and CIFS services for NSS volumes on both Linux and NetWare.

The AFP and CIFS plug-ins also require the NSS Storage Management (nssmgmt.npm) and Storage Management (storagemgmt.npm) plug-ins.

IMPORTANT:Make sure to uninstall the existing File Protocols plug-in, NSS plug-in, and Storage Management plug-in before you upgrade to these new plug-ins.

For information about managing these services, see the following guides:

Samba Management

Provides a Web interface for configuring your Samba server to provide file and print services to clients that support the Microsoft SMB and CIFS protocols. This plug-in supports CIFS access to files on NSS volumes, NCP volumes, and Linux POSIX volumes.

NSS Management

The Novell Storage Services Management (nssmgmt.npm) plug-in allows you to manage NSS services (devices, software RAIDs, pools, and volumes). Information about using this plug-in is the focus of this guide.

Storage Management

The Storage Management (storagemgmt.npm) file contains common code that is shared by the storage-related plug-ins. If you use more than one of these storage-related plug-ins, you should install, update, or remove the storagemgmt.npm file and all installed storage-related .npm files at the same time.

IMPORTANT:If you remove any one of the installed storage-related plug-ins, it removes the common code (storagemgmt.npm) file, which breaks the remaining installed plug-ins.

Files for Storage-Related Plug-Ins

The module files (see Table 9-1, Storage-Related Plug-Ins for iManager) are located in the /var/opt/novell/iManager/nps/portal/modules/ directory.

The Java JAR files are located in the /var/opt/novell/iManager/nps/WEB-INF/lib/ directory.

The Tomcat TLD files are located in the /var/opt/novell/iManager/nps/WEB-INF/ directory.

Table 9-2 Java and Tomcat Files for Storage-Related Plug-Ins

Storage-Related Plug-In	Java Files	Tomcat Files
Novell AFP	afpGadgets.jar afpManageLib.jar afpTags.jar	afp.tld
Archive and Version Services	arkGadgets.jar arkTags.jar arkManageLib.jar	ark.tld
Novell CIFS	cifsGadgets.jar cifsManageLib.jar	cifs.tld
Novell Cluster Services	ncsGadgets.jar ncsManageLib.jar ncs.jar ncsTags.jar	ncs.tld
Novell Distributed File Services	dfsGadgets.jar dfsManageLib.jar nasGadgets.jar	dfs.tld
Files and Folders	fileman.jar
Novell Samba		samba.tld
Novell Storage Services	nssGadgets.jar nssManageLib.jar	nss.tld
Storage Management (common to all)	nssAdminClient.jar nssGadgetLib.jar nssTags.jar

9.1.2 Prerequisites for Using the Storage-Related Plug-Ins

The requirements in this section apply to the storage-related plug-ins for iManager 2.7 that are described in Understanding Storage-Related Plug-Ins.

Web Browser Language Setting

The iManager plug-in might not operate properly if the highest priority Language setting for your Web browser is set to a language other than one of iManager’s supported languages. To avoid problems, in your Web browser, click Tools > Options > Languages, then set the first language preference in the list to a supported language.

Web Browser Character Encoding Setting

Supported language codes are Unicode (UTF-8) compliant. To avoid display problems, make sure the Character Encoding setting for the browser is set to Unicode (UTF-8) or ISO 8859-1 (Western, Western European, West European).

In a Mozilla browser, click View > Character Encoding, then select the supported character encoding setting.

In an Internet Explorer browser, click View > Encoding, then select the supported character encoding setting.

Protocols for iManager Communications

The storage-related plug-ins can be used to manage OES servers. Different communications protocols are required for connecting the various platforms.

Table 9-3 provides information about the protocols needed to use iManager to manage storage in a heterogeneous environment. A protocol annotated with an asterisk (*) is the default and is configured automatically on the servers. The protocols that you use must be loaded and running on both the iManager server and the target server that you want to manage.

For further clarification about WBEM, CIFS, and NCP, see the following section:

Table 9-3 Interoperability of Protocols Used to Connect the iManager Server and Target Servers

iManager Server Operating Platform	Protocol Used to Connect to the Target Server Based on Its Operating Platform (* indicates the default)
iManager Server Operating Platform	OES 1 Linux and Later	OES 1 SP1 NetWare, NetWare 6.5 SP4, and Later	OES 1 NetWare and NetWare 6.5 SP3	NetWare 6.5 SP2
OES 1 Linux and Later	WBEM	WBEM	WBEM (Start WBEM)
OES 1 Linux and Later	CIFS	CIFS	CIFS	CIFS (Field Patch 2B)
OES 1 SP1 NetWare, NetWare 6.5 SP4, and Later	WBEM	WBEM	WBEM (Start WBEM)
		NCP	NCP	NCP
	CIFS	CIFS	CIFS	CIFS (Field Patch 2B)
OES 1 NetWare and NetWare 6.5 SP3	*WBEM	*WBEM	WBEM (Start WBEM)
		NCP	NCP	NCP
	CIFS	CIFS	CIFS	CIFS (Field Patch 2B)
NetWare 6.5 SP2	Not available	NCP	NCP	NCP

WBEM

Where WBEM is the default protocol, WBEM is loaded and runs automatically when you start the server. Otherwise, you must start WBEM to use the protocol.

For OES 11 SP3, the storage-related plug-ins for iManager require CIMOM connections for tasks that transmit sensitive information (such as a username and password) between iManager and the _admin volume on the OES 11 SP3 server that you are managing. Typically, CIMOM is running, so this should be the normal condition when using the server. CIMOM connections use Secure HTTP (HTTPS) for transferring data, and this ensures that sensitive data is not exposed.

If CIMOM is not currently running when you click OK or Finish for the task that sends the sensitive information, you get an error message explaining that the connection is not secure and that CIMOM must be running before you can perform the task.

IMPORTANT:If you receive file protocol errors, it might be because WBEM is not running.

To check the status of SFCB:

As root in a console shell, enter
```
rcsfcb status
```

To start SFCB:

As root in a console shell, enter
```
rcsfcb start
```

9.1.3 Downloading and Installing Plug-In Updates

For information, see the iManager 2.7.x website .

9.1.4 Accessing Novell iManager

Launch a Web browser.
Click File > Open, then enter
```
              https://server-IP-address/nps/iManager.html
            
```
The URL is case sensitive. Replace server-IP-address with the actual server DNS name or IP address. For example:
```
https://192.168.1.1/nps/iManager.html
```
The iManager Login page opens.
Use your administrator username and password to log in to the eDirectory tree that contains the server you want to manage.

In Novell iManager, you can access only the roles and tasks you are authorized to manage. For full access to all available Novell iManager features, you must log in as Supervisor of the tree.

9.1.5 Accessing Roles and Tasks in iManager

Access iManager, then log in to the eDirectory tree where the server you want to manage resides.

For information, see Section 9.1.4, Accessing Novell iManager.
In Roles and Tasks, click the Storage role to expand its main tasks

As you work in the storage-related plug-ins, use the navigation links at the top of the page, referred to as “breadcrumbs,” to return to pages you recently visited, or use the links in Roles and Tasks. If you use the Refresh and Back features of your Web browser to navigate, iManager returns you to the initial page you encountered after login.
To activate the options on the selected page, select a server to manage.

For information, see Section 9.1.6, Selecting a Server to Manage.

9.1.6 Selecting a Server to Manage

Before you can access the management options on a selected task page, you must select a server to manage that is in the same NetIQ eDirectory tree where you are currently logged in.

Use one of the following methods to select a server in the tree where you are logged in:
- Type the NetIQ eDirectory distinguished server name for the server you want to manage, then press Tab or click somewhere on the page outside of the Server field to enter your selection. For example:
```
svr1.company
```
- Click the Search icon to open the eDirectory Object Selector. Browse or search the list to locate the server you want to manage, then click the server name.
- Click the Object History icon to select a server you have recently managed.
Wait for iManager to retrieve information about that server and display the appropriate information to the task page you are in.

It might take several seconds to retrieve the information, depending on the size and complexity of your storage solution.

9.1.7 Storage Plug-In Quick Reference

The Storage role comprises seven key tasks:

Pools

You can create and manage storage pools to efficiently use all free space. You can also enable the Pool Snapshot feature to preserve point-in-time views of data pools and to support data backup and recovery. Snapshots are not supported for clustered pools.

Table 9-4 Pool Management Tasks

Task	Description	Reference
Pools	Displays a list of all pools on the selected server.	Viewing Pools on a Server
Details	Displays information about a selected pool.	Viewing Pool Details
New	Creates a new pool on the selected server.	Creating a Pool
Delete	Deletes a selected pool and all of its volumes and their data.	Deleting a Pool
Rename	Renames a selected pool.	Renaming a Pool
Activate	Mounts and activates a selected deactive or unmounted pool.	Activating and Deactivating Pools
Deactivate	Deactivates a selected active pool.	Activating and Deactivating Pools
Increase Size	Allows you to select one or more partitions from available devices in order to expand the size of a pool.	Increasing the Size of a Pool
Snapshot	Opens the Pool Snapshots page where you can create and manage pool snapshots. This option is disabled for online snapshot pools, because you cannot create a snapshot of a snapshot.	Managing NSS Pool Snapshots
Update eDirectory	Updates (replaces) the eDirectory object for a selected pool. Use only if a storage object is not recognized or has been lost.	Updating eDirectory Pool Objects
Deleted Volume	Displays a list of deleted volumes in a pool, and allows you to salvage or purge them. You can also pause and resume the autopurging of deleted volumes.	Viewing, Salvaging, or Purging Deleted NSS Volumes in a Pool
Offline	For a pool snapshot that is online as an active pool, takes it offline. This does not delete the pool snapshot.	Viewing and Managing an Online Pool Snapshot
Partitions	Displays a list of the partitions comprising the pool’s storage space.	Viewing Partition Information for a Pool
Volumes	Lists all volumes on a selected pool.	Viewing Volume Information for a Pool
Devices	Displays a list of the devices that contribute space to a selected pool.	Viewing Device Information for a Pool

Volumes

You can create and manage NSS volumes, including their key attributes.

Table 9-5 Volume Management Tasks

Task	Description	Reference
Volumes	Displays a list of all volumes on the selected server.	Managing NSS Volumes
Details	Displays information about a selected volume.	Viewing the Details of an NSS Volume
New	Creates a new unencrypted volume. To create an encrypted NSS volume, use NSSMU.	Creating Unencrypted NSS Volumes
Delete	Deletes a selected volume and all of its contents.	Deleting an NSS Volume
Rename	Renames a selected volume.	Renaming an NSS Volume
Activate	Mounts and activates a deactive or unmounted volume.	Activating and Deactivating an NSS Volume
Deactivate	Deactivates an active volume.	Activating and Deactivating an NSS Volume
Mount	Mounts an unmounted volume. A volume must be mounted to view its details.	Mounting and Dismounting an NSS Volume
Dismount	Dismounts a mounted volume.	Mounting and Dismounting an NSS Volume
Move	Moves a selected NSS volume for the purpose of reorganizing and redistributing storage on the same server (or to other servers) in response to changing business needs.	For requirements, guidelines, and procedures for splitting volumes, see Using DFS to Move NSS Volumes in the OES 11 SP3: Novell Distributed File Services Administration Guide for Linux.
Split	Splits a selected NSS volume for the purpose of reorganizing and redistributing storage on the same server (or to other servers) in response to changing business needs.	For requirements, guidelines, and procedures for splitting volumes, see Using DFS to Split NSS Volumes in the OES 11 SP3: Novell Distributed File Services Administration Guide for Linux.
Properties	Displays a list of volume attributes, and allows you to set the attributes and name space to use for a volume. It also displays usage statistics for a volume.	Viewing Properties of an NSS Volume
User Quotas	Displays user quotas and space consumed for users of the volume. Administrators can view and manage user quotas. Users can view their own user space quotas.	Configuring a User Space Quota
Offline	Takes a selected snapshot volume offline, where it remains active in the background.	Viewing and Managing an Online Pool Snapshot
Update eDirectory	Updates (replaces) the eDirectory object. Use only if a storage object is not recognized or has been lost.	Updating eDirectory Volume Objects

User Quotas

The User Quotas task (see Table 9-6) allows managers to view and manage user space restrictions. It can be specified as an iManager role-based task for administrators. An individual user can log in to iManager under his or her own username to view the user’s user space restrictions.

Table 9-6 User Quotas Task

Task	Description	Reference
User Quotas	For the Administrator user, displays quotas and allows the administrator user to manage user quotas for all users. For the user, displays the user’s own space restrictions.	Configuring a User Space Quota

Task

Description

Reference

User Quotas

For the Administrator user, displays quotas and allows the administrator user to manage user quotas for all users.

For the user, displays the user’s own space restrictions.

Configuring a User Space Quota

Partitions

NSS creates and deletes partitions for you when you work with software RAIDS and pools in iManager and NSSMU. To delete partitions manually, use the NSSMU Partitions page.

Table 9-7 Partitions Tasks

Task	Description	Reference
Partitions	Displays a list of all partitions on a selected server.	Viewing a List of Partitions
Details	Displays information about a selected partition.	Viewing Details for a Partition
Edit (NetWare)	Adds a label for a selected partition.	Labeling a Partition in the NW 6.5 SP8: NSS File System Administration Guide

Software RAIDs

You can create and manage software RAID 0, 1, and 5 devices to improve storage performance and reliability. You can use NSSMU to create a software RAID 0+1 or 5+1 device.

Table 9-8 Software RAID Management Tasks

Task	Description	Reference
Software RAIDs	Displays a list of software RAID devices on the selected server.	Viewing a List of Software RAID Devices on a Server
Details	Displays the details of a selected software RAID device.	Viewing Details of a Software RAID Device
New	Creates a new software RAID 0, 1, or 5 device for the selected server.	Creating Software RAID Devices with iManager
Rename	Renames a selected software RAID device.	Renaming a Software RAID Device
Increase Size	Expands an existing software RAID device by adding a partition to the RAID (up to the limit for that type of RAID). If there are no devices available, the button is disabled. Each partition you add must reside on a different device. You can add partitions that match the shared state of current member devices. They must be all local or all shared; you cannot mix them.	Increasing the Size of a Software RAID Device
Restripe	Completes a restriping process for a RAID 0 or RAID 5 device that has been paused.	Restriping a Software RAID
Delete	Deletes the selected software RAID device and removes the RAID relationship between member partitions and the underlying storage structures. All data on the member partitions is lost.	Deleting a Software RAID Device
Pools	Lists pools on a selected software RAID devices.	Viewing Pools on a Software RAID Device
Partitions	Lists details about partitions (member segments) in the RAID. In some cases, you can also delete a partition to repair a RAID.	Viewing Partitions on a Software RAID Device

Devices

You can configure, mount, and maintain a wide selection of storage devices, including direct-attached-storage devices, network-attached storage devices, networked storage devices in a Fibre Channel or iSCSI storage area network (SAN), and hardware device arrays.

Table 9-9 Device Management Tasks

Task	Description	Reference
Devices	Displays a list of all local and external devices available on the selected server.	Viewing a List of Devices on a Server
Details	Displays information about a selected device.	Viewing Details for a Device
Initialize Disk	Initializes a selected device by erasing its partition table, effectively destroying all of its data. If devices are present but not showing up for creating pools and volumes, you should initialize the disk.	Initializing a Disk
Multipath (NetWare)	For network configurations with multiple paths between network devices and your NetWare server, opens the Multipath page where you can set the primary path and path failover priorities for fault tolerance of connections between host bus adapters and storage devices. You can also bring paths up and down.	Managing Multipath I/O to Devices (NetWare) in the NW 6.5 SP8: NSS File System Administration Guide
Set Default Path (NetWare)	Sets the connection to selected device to its user-defined default primary path.	Setting the Primary Path for a Device to Its Default Path in the NW 6.5 SP8: NSS File System Administration Guide
Reset Registry (NetWare)	Resets the multipath priority settings for a selected device in the server registry to its user-defined defaults.	Resetting the Server Registry with Default Priority Settings for a Device in the NW 6.5 SP8: NSS File System Administration Guide
Shareable for Clustering	Enables device sharing to support high-availability server clusters.	Sharing Devices
Pools	Displays a list of the pools on a device.	Viewing Pools on a Device
Partitions	Displays information about partitions that are configured on a device.	Viewing Partitions on a Device

9.1.8 Files and Folders Plug-In Quick Reference

The Files and Folders plug-in for iManager 2.7.x provides the Files and Folders role for Linux and NetWare. It is also integrated in iManager as the View Objects option in the iManager toolbar. File browsing in iManager is available for file systems that have a Volume object defined in eDirectory, such as for NSS volumes on Linux and NetWare and for NCP volumes on Linux.

The Files and Folders Manager NPM file (filemanager.npm) is automatically installed in iManager. For information about manually installing NPM files for iManager, see the iManager 2.7.x website.

Click the Files and Folders role to select tasks first, then search for the file or folder you want to manage. Click the View Objects icon to view the Tree, Browse, and Search view of a server’s eDirectory objects in the left pane. In the Tree view, click a Volume object to see the hierarchical file system tree view of the volume's folders and files. Click the plus (+) or minus (-) icon next to a directory name to expand or collapse the view of its subdirectories. Locate the file or folder you want to manage, then specify the action you want to perform for it.

The Files and Folders plug-in for Novell iManager 2.7.x provides the tasks described in this section. All of the tasks and actions that are available under the Files and Folders role are also available from the View Objects tree view.

Delete

Deletes a file or folder on an NSS volume or an NCP volume (NCP share on a Linux POSIX file system). For information, see Section 25.2, Deleting a File or Folder on an NSS Volume.

Deleted Files

Salvages or purges deleted files on an NSS volume. Salvage and purge of deleted files and directories is available only for NSS volumes where the volume’s Salvage attribute is enabled. Other NSS settings determine how long deleted files and directories are available.

For information about configuring salvage and purge behavior for NSS volumes, see Section 23.0, Salvaging and Purging Deleted Volumes, Directories, and Files.

For non-NSS volumes, the Deleted Files report is empty (no deleted files).

Download

Downloads a selected file from an NSS volume or NCP volume to a specified location on your local drive or mapped network drive. For information, see Section 25.4, Downloading Files from an NSS Volume.

New Folder

Creates a folder on an NSS volume or NCP volume. For information, see Section 25.1, Creating a Folder on an NSS Volume.

Properties

Adds, removes, or modifies file system trustees, trustee rights, inherited rights filters, and file system attributes for files and folders on NSS volumes and NCP volumes. See Table 9-10 for a complete list of tasks you can perform from the Properties page.

Table 9-10 Properties Tasks

Properties Tab	Task Description
Information	Displays or modifies a directory quota for the selected folder. Directory quotas management is available only for NSS volumes where the volume’s Directory Quotas attribute is enabled. For information, see Section 22.3, Managing Directory Quotas. Displays information about a selected file or folder, such as: Current size Time stamps for when the file was created, modified, accessed, and archived Displays or modifies the owner of a selected file or folder. Displays or modifies the file system attributes for a file or folder. For information, see Section 20.1.3, Configuring File or Folder Attributes.
Rights	Displays, adds, or removes file system trustees for a selected file or directory. Displays, grants, or revokes file system trustee rights for trustees of the selected file or directory. Displays or modifies the inherited rights filter for a selected file or directory. For information, see Section 20.1, Configuring File System Trustees, Trustee Rights, Inherited Rights Filters, and Attributes.
Inherited Rights	Displays or modifies the inherited rights filters at every level of the path for a selected file or directory. For information, see Configuring the Inherited Rights Filter for a File or Directory. Displays the effective rights for the selected file or directory. For information, see Section 20.1.5, Viewing Effective Rights for a Trustee.

Properties Tab

Task Description

Information

Displays or modifies a directory quota for the selected folder. Directory quotas management is available only for NSS volumes where the volume’s Directory Quotas attribute is enabled. For information, see Section 22.3, Managing Directory Quotas.

Displays information about a selected file or folder, such as:

Current size
Time stamps for when the file was created, modified, accessed, and archived

Displays or modifies the owner of a selected file or folder.

Displays or modifies the file system attributes for a file or folder. For information, see Section 20.1.3, Configuring File or Folder Attributes.

Rights

Displays, adds, or removes file system trustees for a selected file or directory.

Displays, grants, or revokes file system trustee rights for trustees of the selected file or directory.

Displays or modifies the inherited rights filter for a selected file or directory.

For information, see Section 20.1, Configuring File System Trustees, Trustee Rights, Inherited Rights Filters, and Attributes.

Inherited Rights

Displays or modifies the inherited rights filters at every level of the path for a selected file or directory. For information, see Configuring the Inherited Rights Filter for a File or Directory.

Displays the effective rights for the selected file or directory. For information, see Section 20.1.5, Viewing Effective Rights for a Trustee.

Upload

Uploads a specified file from your local drive or a mapped network drive to a specified location on an NSS volume or NCP volume. For information, see Section 25.3, Uploading Files to an NSS Volume.